# cutting_data_profiles

id: cutting-profile-b9c6d511db9b1dc1
tool_id: CCGT060202MFFS
grade_id: grade-73e62dbd7079124e
source_id: source-780f5d4ed6932e58
source_part_number: CCGT060202MFFS
source_grade: KCS25S
source_geometry: TopSwiss Carbide Insert Positive CCGT-FFS Finish Machining
source_chipbreaker: FFS
source_material_label: Ferritic, Martensitic, and PH Stainless Steels; <330 HB; <35 HRC
iso_material_group: P
material_subgroup: P5
operation_type: turning
cut_condition: finishing
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF page 2
source_table_ref: P5 / KCS25S | Positive FFS cutting parameters
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-22
source_raw_text:
P5 Ferritic, Martensitic, and PH Stainless Steels; <330 HB; <35 HRC; KCS25S speed MIN/START/MAX 53/75/107 m/min. Positive FFS feed 0.02–0.12 mm/rev; depth of cut 0.13–1.26 mm.

notes:
Greg approved the proposed database and website update after reviewing the exact Kennametal product page and its linked manufacturer feeds-and-speeds PDF in the active Hermes conversation.


id: cutting-profile-b9aa803bf315f02e
tool_id: CCET060200RPPS-KN10S
grade_id: grade-3f5a018ad17f3822
source_id: source-d0bac814365ef9d4
source_part_number: CCET060200RPPS
source_grade: KN10S
source_geometry: CCET Insert - Positive - PPS (Right Hand)
source_chipbreaker: PPS
source_material_label: Wrought Aluminum Alloys
iso_material_group: N
material_subgroup: N1
operation_type: turning
cut_condition: medium
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF page 20
source_table_ref: N1 / KN10S | Positive PPS cutting parameters
extraction_method: manual
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-21
source_raw_text:
CCET2150RPPS / CCET060200RPPS lists KN10S; N1 KN10S speed is 198 / 488 / 616 m/min; PPS feed is 0.01-0.1 mm/rev and DOC is 0.06-4.5 mm.

notes:
Review topswiss-001: approved_with_corrections by Greg on 2026-07-21. Approved after reviewing catalog pages 4 and 20 and correcting the user-supplied designation breakdown to the narrower manufacturer-supported wording.


id: cutting-profile-01c77632f7eff873
tool_id: CCET060201RPPS-KN10S
grade_id: grade-3f5a018ad17f3822
source_id: source-d0bac814365ef9d4
source_part_number: CCET060201RPPS
source_grade: KN10S
source_geometry: CCET Insert - Positive - PPS (Right Hand)
source_chipbreaker: PPS
source_material_label: Copper, Brass, Zinc-Based; machinability index 70-100
iso_material_group: N
material_subgroup: N4
operation_type: turning
cut_condition: medium
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF page 20
source_table_ref: N4 / KN10S | Positive PPS cutting parameters
extraction_method: manual
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-21
source_raw_text:
CCET21502RPPS / CCET060201RPPS lists KN10S; N4 KN10S speed is 107 / 259 / 366 m/min; PPS feed is 0.01-0.1 mm/rev and DOC is 0.06-4.5 mm.

notes:
Review topswiss-002: approved_with_corrections by Greg on 2026-07-21. Approved after visual review of catalog pages 4 and 20. The exact Kennametal product page independently confirms the dimensions, KN10S grade, and non-ferrous application.


id: cutting-profile-578c7aa25f44d7dc
tool_id: CCET09T302LPPS-KTP25S
grade_id: grade-0292376e9a8f257e
source_id: source-d0bac814365ef9d4
source_part_number: CCET09T302LPPS
source_grade: KTP25S
source_geometry: CCET Insert - Positive - PPS (Left Hand)
source_chipbreaker: PPS
source_material_label: Medium- and High-Carbon Steels (>0.3% C)
iso_material_group: P
material_subgroup: P2
operation_type: turning
cut_condition: medium
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF pages 14, 15
source_table_ref: P2 / KTP25S | Positive PPS cutting parameters
extraction_method: manual
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-21
source_raw_text:
CCET32505LPPS / CCET09T302LPPS lists KTP25S; P2 KTP25S speed is 122 / 204 / 312 m/min; PPS feed is 0.01-0.1 mm/rev and DOC is 0.06-4.5 mm.

notes:
Review topswiss-003: approved by Greg on 2026-07-21. Approved after visual review of catalog pages 4, 14, and 15. KTP25S is valid for smooth PPS steel cutting but is not bolded as first choice; KCP20S is the first-choice grade shown by Kennametal. Grade selection priority: alternate; first choice: KCP20S.


id: cutting-profile-86ad4c07dae5822b
tool_id: CCGT09T304MFFS-KCS25S
grade_id: grade-73e62dbd7079124e
source_id: source-d0bac814365ef9d4
source_part_number: CCGT09T304MFFS
source_grade: KCS25S
source_geometry: CCGT Insert - Positive - FFS
source_chipbreaker: FFS
source_material_label: Austenitic Stainless Steel
iso_material_group: M
material_subgroup: M1
operation_type: turning
cut_condition: finishing
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF page 18
source_table_ref: M1 / KCS25S | Positive FFS cutting parameters
extraction_method: manual
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-21
source_raw_text:
CCGT3251MFFS / CCGT09T304MFFS lists KCS25S; M1 KCS25S speed is 59 / 101 / 149 m/min; FFS feed is 0.02-0.12 mm/rev and DOC is 0.13-1.26 mm.

notes:
Review topswiss-004: approved_with_corrections by Greg on 2026-07-21. Approved after visual review of catalog pages 3 and 18. The exact product page confirms steel, stainless steel, and high-temperature applications and does not list non-ferrous materials. Grade selection priority: alternate; first choice: KCM25S. Source ambiguity: PDF page 18 labels the right-hand FFS/LFS/PPS/FPS/MPS table as Negative Insert Geometry even though those columns are the positive geometries used elsewhere in the catalog. This appears to be a catalog heading error, but rows using page 18 still require human acceptance.


id: cutting-profile-35e36d002b9326f6
tool_id: CCGT21502MRPPS-KCP20S
grade_id: grade-dc154640f804a8a1
source_id: source-d0bac814365ef9d4
source_part_number: CCGT060201MRPPS
source_grade: KCP20S
source_geometry: CCGT Insert - Positive - PPS
source_chipbreaker: PPS
source_material_label: Low-Carbon (<0.3% C) and Free-Machining Steel
iso_material_group: P
material_subgroup: P0/P1
operation_type: turning
cut_condition: medium
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF pages 14, 15
source_table_ref: P0/P1 / KCP20S | Positive PPS cutting parameters
extraction_method: manual
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-21
source_raw_text:
CCGT21502MRPPS / CCGT060201MRPPS lists KCP20S; P0/P1 KCP20S speed is 50 / 165 / 274 m/min; PPS feed is 0.01-0.1 mm/rev and DOC is 0.06-4.5 mm.

notes:
Review topswiss-005: approved_with_corrections by Greg on 2026-07-21. Approved after visual review of catalog pages 3, 14, and 15. KCP20S is bolded as first choice for smooth PPS cutting. Grade selection priority: first_choice; first choice: KCP20S.


id: cutting-profile-3584f0cfae71323f
tool_id: CCGT32505MRPPS-KCM25S
grade_id: grade-3e0c29b6e666a043
source_id: source-d0bac814365ef9d4
source_part_number: CCGT09T302MRPPS
source_grade: KCM25S
source_geometry: CCGT Insert - Positive - PPS
source_chipbreaker: PPS
source_material_label: Austenitic Stainless Steel
iso_material_group: M
material_subgroup: M1
operation_type: turning
cut_condition: medium
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF page 18
source_table_ref: M1 / KCM25S | Positive PPS cutting parameters
extraction_method: manual
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-21
source_raw_text:
CCGT32505MRPPS / CCGT09T302MRPPS lists KCM25S; M1 KCM25S speed is 40 / 59 / 101 m/min; PPS feed is 0.01-0.1 mm/rev and DOC is 0.06-4.5 mm.

notes:
Review topswiss-006: approved by Greg on 2026-07-21. Approved after visual review of catalog pages 3 and 18. KCM25S is bolded as first choice for smooth, pre-turned PPS cutting in M1 austenitic stainless steel. The exact part/grade pairing is established by the local Kennametal catalog; no exact public product URL or material number was asserted. Grade selection priority: first_choice; first choice: KCM25S. Source ambiguity: PDF page 18 labels the right-hand FFS/LFS/PPS/FPS/MPS table as Negative Insert Geometry even though those columns are the positive geometries used elsewhere in the catalog. This appears to be a catalog heading error, but rows using page 18 still require human acceptance. On catalog page 18, the right-hand grade-selection table is headed 'Negative Insert Geometry' even though its columns are the positive geometries FFS, LFS, and PPS. The geometry labels and the separate positive-geometry feed/DOC table establish that the heading is erroneous.


id: cutting-profile-441675444241b62e
tool_id: CCMT060202FWS-KTP25S
grade_id: grade-0292376e9a8f257e
source_id: source-d0bac814365ef9d4
source_part_number: CCMT060202FWS
source_grade: KTP25S
source_geometry: CCMT Insert - Positive - FWS
source_chipbreaker: FWS
source_material_label: Medium- and High-Carbon Steels (>0.3% C)
iso_material_group: P
material_subgroup: P2
operation_type: turning
cut_condition: finishing
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF pages 16, 17
source_table_ref: P2 / KTP25S wiper | Positive FWS wiper cutting parameters
extraction_method: manual
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-21
source_raw_text:
CCMT21505FWS / CCMT060202FWS lists KTP25S; P2 KTP25S speed is 122 / 204 / 312 m/min; FWS feed is 0.05-0.5 mm/rev and DOC is 0.14-2.5 mm.

notes:
Review topswiss-007: approved_with_corrections by Greg on 2026-07-21. Approved after visual review of catalog pages 5, 16, and 17. The local catalog establishes the exact part/grade pairing and dimensions; Kennametal's current material-number page independently confirms the identity, cermet construction, steel application, and no-longer-available status. Grade selection priority: sole_listed_grade; first choice: KTP25S.


id: cutting-profile-27c9ce6b15413b94
tool_id: CCMT060204FPS-KTP25S
grade_id: grade-0292376e9a8f257e
source_id: source-d0bac814365ef9d4
source_part_number: CCMT060204FPS
source_grade: KTP25S
source_geometry: CCMT Insert - Positive - FPS
source_chipbreaker: FPS
source_material_label: Low-Carbon (<0.3% C) and Free-Machining Steel
iso_material_group: P
material_subgroup: P0/P1
operation_type: turning
cut_condition: finishing
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF pages 14, 15
source_table_ref: P0/P1 / KTP25S | Positive FPS cutting parameters
extraction_method: manual
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-21
notes:
Review topswiss-008: approved_with_corrections by Greg on 2026-07-21. Approved after visual review of catalog pages 5, 14, and 15. The exact product page independently confirms the identity, dimensions, cermet grade, P/M applicability, and no-longer-available status. Only the reviewed P0/P1 steel cutting profile is approved in this row. Grade selection priority: sole_listed_grade; first choice: KTP25S.


id: cutting-profile-fbf40c07ab884f65
tool_id: CCMT09T304MWS-KTP25S
grade_id: grade-0292376e9a8f257e
source_id: source-d0bac814365ef9d4
source_part_number: CCMT09T304MWS
source_grade: KTP25S
source_geometry: CCMT Insert - Positive - MWS
source_chipbreaker: MWS
source_material_label: Alloy Steels and Tool Steels; <330 HB; <35 HRC
iso_material_group: P
material_subgroup: P3
operation_type: turning
cut_condition: medium
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF pages 16, 17
source_table_ref: P3 / KTP25S wiper | Positive MWS wiper cutting parameters
extraction_method: manual
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-21
source_raw_text:
CCMT3251MWS / CCMT09T304MWS lists KTP25S; P3 KTP25S speed is 122 / 189 / 274 m/min; MWS feed is 0.14-0.56 mm/rev and DOC is 0.49-3.2 mm.

notes:
Review topswiss-009: approved by Greg on 2026-07-21. Approved after visual review of catalog pages 4, 16, and 17. The exact part/grade pairing and dimensions are established by the local manufacturer catalog. No exact public product page was found for the larger CCMT09T304MWS variant, so its material number and lifecycle remain unknown rather than being inferred from a smaller sibling. Grade selection priority: sole_listed_grade; first choice: KTP25S.


id: cutting-profile-f877760b6a27429a
tool_id: DCGT070202MRPPS-KCP20S
grade_id: grade-dc154640f804a8a1
source_id: source-d0bac814365ef9d4
source_part_number: DCGT070202MRPPS
source_grade: KCP20S
source_geometry: DCGT Insert - Positive - PPS
source_chipbreaker: PPS
source_material_label: Alloy Steels and Tool Steels; <330 HB; <35 HRC
iso_material_group: P
material_subgroup: P3
operation_type: turning
cut_condition: medium
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF pages 14, 15
source_table_ref: P3 / KCP20S | Positive PPS cutting parameters
extraction_method: manual
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-21
source_raw_text:
DCGT21505MRPPS / DCGT070202MRPPS lists KCP20S; P3 KCP20S speed is 50 / 110 / 165 m/min; PPS feed is 0.01-0.1 mm/rev and DOC is 0.06-4.5 mm.

notes:
Review topswiss-010: approved_with_corrections by Greg on 2026-07-21. Approved after visual review of catalog pages 6, 14, and 15. The catalog establishes the exact part/grade pairing, dimensions, and radius tolerance. Kennametal's family page establishes right-hand DCGT-R-PPS and medium-machining classification. KCP20S is bolded as first choice for smooth PPS steel cutting. Grade selection priority: first_choice; first choice: KCP20S.


id: cutting-profile-fa146403d5b1f565
tool_id: DCGT11T301MRPPS-KCS25S
grade_id: grade-73e62dbd7079124e
source_id: source-d0bac814365ef9d4
source_part_number: DCGT11T301MRPPS
source_grade: KCS25S
source_geometry: DCGT Insert - Positive - PPS
source_chipbreaker: PPS
source_material_label: Austenitic Stainless Steel
iso_material_group: M
material_subgroup: M1
operation_type: turning
cut_condition: medium
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF page 18
source_table_ref: M1 / KCS25S | Positive PPS cutting parameters
extraction_method: manual
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-21
notes:
Review topswiss-011: approved_with_corrections by Greg on 2026-07-21. Approved after visual review of catalog pages 6 and 18. The exact product page independently confirms the identity, material number, dimensions, KCS25S grade, right-hand medium-machining classification, P/M/S applicability, and no-longer-available status. KCS25S is valid for M1 smooth PPS cutting but is not bolded as first choice; KCM25S is first choice. Grade selection priority: alternate; first choice: KCM25S. Source ambiguity: PDF page 18 labels the right-hand FFS/LFS/PPS/FPS/MPS table as Negative Insert Geometry even though those columns are the positive geometries used elsewhere in the catalog. This appears to be a catalog heading error, but rows using page 18 still require human acceptance. On catalog page 18, the right-hand grade-selection table is headed 'Negative Insert Geometry' even though its columns are the positive geometries FFS, LFS, and PPS. The geometry labels and separate positive-geometry feed/DOC table establish that the heading is erroneous.


id: cutting-profile-8becc51632e7d0c9
tool_id: DCGT11T304MLFS-KCM25S
grade_id: grade-3e0c29b6e666a043
source_id: source-d0bac814365ef9d4
source_part_number: DCGT11T304MLFS
source_grade: KCM25S
source_geometry: DCGT Insert - Positive - LFS
source_chipbreaker: LFS
source_material_label: Austenitic Stainless Steel
iso_material_group: M
material_subgroup: M1
operation_type: turning
cut_condition: finishing
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF page 18
source_table_ref: M1 / KCM25S | Positive LFS cutting parameters
extraction_method: manual
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-21
notes:
Review topswiss-012: approved_with_corrections by Greg on 2026-07-21. Approved after visual review of catalog pages 6 and 18. The exact product page independently confirms the identity, material number, dimensions, KCM25S grade, neutral light-machining family, P/M/S applicability, and no-longer-available status. KCM25S is bolded as first choice for smooth M1 LFS cutting. Grade selection priority: first_choice; first choice: KCM25S. Source ambiguity: PDF page 18 labels the right-hand FFS/LFS/PPS/FPS/MPS table as Negative Insert Geometry even though those columns are the positive geometries used elsewhere in the catalog. This appears to be a catalog heading error, but rows using page 18 still require human acceptance. On catalog page 18, the right-hand grade-selection table is headed 'Negative Insert Geometry' even though its columns are the positive geometries FFS, LFS, and PPS. The geometry labels and separate positive-geometry feed/DOC table establish that the heading is erroneous.


id: cutting-profile-09efd030d61be37b
tool_id: BF-CCGT09T304TS2
grade_id: grade-71fa8effe37ffc3b
source_id: source-140cd7506a42b01f
source_part_number: BF-CCGT09T304TS2
source_grade: BC8110
source_geometry: positive CBN insert, TS2 edge preparation
source_chipbreaker: BF
source_material_label: Hardened Steel
iso_material_group: H
material_subgroup: Hardened steel / continuous
operation_type: turning
cut_condition: general
coolant_condition: flood
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF page 9
source_table_ref: B008 Recommended Cutting Conditions / BC8210 and BC8110
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-22
source_raw_text:
Hardened Steel; Continuous cutting for general purpose; BC8210 and BC8110; Cutting Speed vc 655 (330-985) SFM; Feed f <=.008 IPR; Depth of Cut ap <=.014 inch; Dry, Wet.

notes:
Greg selected the recommended scope: identity fix plus all BF/BM inserts. C010A limits are preserved as one-sided maxima; flood is the practical shop profile.


id: cutting-profile-65732c391581a0f7
tool_id: BF-CCGT09T304TS2
grade_id: grade-913cb0c742bedf4a
source_id: source-140cd7506a42b01f
source_part_number: BF-CCGT09T304TS2
source_grade: BC8210
source_geometry: positive CBN insert, TS2 edge preparation
source_chipbreaker: BF
source_material_label: Hardened Steel
iso_material_group: H
material_subgroup: Hardened steel / BF breaker
operation_type: turning
cut_condition: finishing
coolant_condition: flood
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF page 12
source_table_ref: B011 BF Breaker Recommended Cutting Conditions
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-22
source_raw_text:
BF Breaker (BC8210, BC8220); finish cutting at depths of .012 inch or less; Recommended Cutting Conditions: vc=260-655 SFM, f<=.012 IPR, ap=.004-.012 inch.

notes:
Greg selected the recommended scope: identity fix plus all BF/BM inserts. C010A limits are preserved as one-sided maxima; flood is the practical shop profile.


id: cutting-profile-c28c7aa2789de037
tool_id: BM-CCGT09T304TA2
grade_id: grade-58e7fb4e760ae938
source_id: source-140cd7506a42b01f
source_part_number: BM-CCGT09T304TA2
source_grade: BC8120
source_geometry: positive CBN insert, TA2 edge preparation
source_chipbreaker: BM
source_material_label: Hardened Steel
iso_material_group: H
material_subgroup: Hardened steel / continuous
operation_type: turning
cut_condition: general
coolant_condition: flood
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF page 9
source_table_ref: B008 Recommended Cutting Conditions / BC8220 and BC8120
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-22
source_raw_text:
Hardened Steel; Continuous cutting for general purpose; BC8220 and BC8120; Cutting Speed vc 655 (330-755) SFM; Feed f <=.012 IPR; Depth of Cut ap <=.031 inch; Dry, Wet.


id: cutting-profile-e951a5978b92e367
tool_id: BM-CCGT09T304TA2
grade_id: grade-58e7fb4e760ae938
source_id: source-140cd7506a42b01f
source_part_number: BM-CCGT09T304TA2
source_grade: BC8120
source_geometry: positive CBN insert, TA2 edge preparation
source_chipbreaker: BM
source_material_label: Hardened Steel
iso_material_group: H
material_subgroup: Hardened steel / medium interrupted
operation_type: turning
cut_condition: medium
coolant_condition: flood
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF page 9
source_table_ref: B008 Recommended Cutting Conditions / medium interrupted
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-22
source_raw_text:
Hardened Steel; Medium interrupted cutting; BC8220 and BC8120; Cutting Speed vc 490 (195-655) SFM; Feed f <=.008 IPR; Depth of Cut ap <=.012 inch; Dry, Wet.


id: cutting-profile-186b1b998fefe6fd
tool_id: BM-CCGT09T304TA2
grade_id: grade-f6f65d9b6a148373
source_id: source-140cd7506a42b01f
source_part_number: BM-CCGT09T304TA2
source_grade: BC8220
source_geometry: positive CBN insert, TA2 edge preparation
source_chipbreaker: BM
source_material_label: Hardened Steel
iso_material_group: H
material_subgroup: Hardened steel / BM breaker
operation_type: turning
cut_condition: medium
coolant_condition: flood
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: PDF page 12
source_table_ref: B011 BM Breaker Recommended Cutting Conditions
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-22
source_raw_text:
BM Breaker (BC8220); Recommended Cutting Conditions: vc=260-655 SFM, f<=.012 IPR, ap=.012-.031 inch.


id: cutting-profile-c058a75520e2874f
tool_id: NP-CCGW060202SE2
grade_id: grade-56a2ca31cd74d894
source_id: source-mitsubishi-b246a
source_part_number: NP-CCGW060202SE2
source_grade: MB4120
source_geometry: positive 80-degree rhombic CBN insert, SE2 edge preparation
source_chipbreaker: none
source_material_label: Gray cast iron
iso_material_group: K
material_subgroup: Gray cast iron
operation_type: turning
cut_condition: general
coolant_condition: flood
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 12
source_table_ref: Tool News B246A final-page Recommended Cutting Conditions / MB4120
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
notes:
Tool News B234G/B246A grade-level gray-cast-iron baselines in exact source units; flood selected as the shop practical mode from manufacturer dry/wet wording.


id: cutting-profile-d82e1b8628fb946e
tool_id: NP-CCGW09T304FBWL2
grade_id: grade-c59dd237c9dc5610
source_id: source-140cd7506a42b01f
source_part_number: NP-CCGW09T304FBWL2
source_grade: BC8105
source_geometry: positive 80-degree rhombic CBN insert, FBWL2 edge preparation
source_chipbreaker: none
source_material_label: Hardened Steel
iso_material_group: H
material_subgroup: Hardened steel / high-speed finishing
operation_type: turning
cut_condition: finishing
coolant_condition: flood
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 9
source_table_ref: B008 Heat Treated Steel Recommended Cutting Conditions / Coated / BC8105
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
Heat Treated Steel; High speed finishing cutting; Coated; BC8105; Cutting Speed vc 820 (330-1150) SFM; Feed f <=.006 IPR; Depth of Cut ap <=.008 inch; Dry, Wet.

notes:
C010A B008 grade-level hardened-steel baselines; limits preserved as one-sided maxima; flood selected as the shop practical mode from manufacturer Dry/Wet wording.


id: cutting-profile-6579efcc655b4cd7
tool_id: NP-CCGW09T304FBWL2
grade_id: grade-71fa8effe37ffc3b
source_id: source-140cd7506a42b01f
source_part_number: NP-CCGW09T304FBWL2
source_grade: BC8110
source_geometry: positive 80-degree rhombic CBN insert, FBWL2 edge preparation
source_chipbreaker: none
source_material_label: Hardened Steel
iso_material_group: H
material_subgroup: Hardened steel / continuous
operation_type: turning
cut_condition: general
coolant_condition: flood
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 9
source_table_ref: B008 Heat Treated Steel Recommended Cutting Conditions / Coated / BC8210 and BC8110
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
Heat Treated Steel; Continuous cutting for general purpose; Coated; BC8210 and BC8110; Cutting Speed vc 655 (330-985) SFM; Feed f <=.008 IPR; Depth of Cut ap <=.014 inch; Dry, Wet.

notes:
C010A B008 grade-level hardened-steel baselines; limits preserved as one-sided maxima; flood selected as the shop practical mode from manufacturer Dry/Wet wording.


id: cutting-profile-da1d43e8819bdcc0
tool_id: NP-CCGW09T304FBWL2
grade_id: grade-58e7fb4e760ae938
source_id: source-140cd7506a42b01f
source_part_number: NP-CCGW09T304FBWL2
source_grade: BC8120
source_geometry: positive 80-degree rhombic CBN insert, FBWL2 edge preparation
source_chipbreaker: none
source_material_label: Hardened Steel
iso_material_group: H
material_subgroup: Hardened steel / continuous
operation_type: turning
cut_condition: general
coolant_condition: flood
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 9
source_table_ref: B008 Heat Treated Steel Recommended Cutting Conditions / Coated / BC8220 and BC8120
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
Heat Treated Steel; Continuous cutting for general purpose; Coated; BC8220 and BC8120; Cutting Speed vc 655 (330-755) SFM; Feed f <=.012 IPR; Depth of Cut ap <=.031 inch; Dry, Wet.

notes:
C010A B008 grade-level hardened-steel baselines; limits preserved as one-sided maxima; flood selected as the shop practical mode from manufacturer Dry/Wet wording.


id: cutting-profile-6f7d0fb032cbfd92
tool_id: NP-CCGW09T304FBWL2
grade_id: grade-58e7fb4e760ae938
source_id: source-140cd7506a42b01f
source_part_number: NP-CCGW09T304FBWL2
source_grade: BC8120
source_geometry: positive 80-degree rhombic CBN insert, FBWL2 edge preparation
source_chipbreaker: none
source_material_label: Hardened Steel
iso_material_group: H
material_subgroup: Hardened steel / medium interrupted
operation_type: turning
cut_condition: medium
coolant_condition: flood
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 9
source_table_ref: B008 Heat Treated Steel Recommended Cutting Conditions / Coated / BC8220 and BC8120
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
Heat Treated Steel; Medium interrupted cutting; Coated; BC8220 and BC8120; Cutting Speed vc 490 (195-655) SFM; Feed f <=.008 IPR; Depth of Cut ap <=.012 inch; Dry, Wet.


id: cutting-profile-a922bbdd40998511
tool_id: NP-CCGW09T304FBWL2
grade_id: grade-9acc55c5162f623b
source_id: source-140cd7506a42b01f
source_part_number: NP-CCGW09T304FBWL2
source_grade: MB8110
source_geometry: positive 80-degree rhombic CBN insert, FBWL2 edge preparation
source_chipbreaker: none
source_material_label: Hardened Steel
iso_material_group: H
material_subgroup: Hardened steel / continuous
operation_type: turning
cut_condition: general
coolant_condition: flood
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 9
source_table_ref: B008 Heat Treated Steel Recommended Cutting Conditions / Non-coated / MB8110
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
Heat Treated Steel; Continuous cutting for general purpose; Non-coated; MB8110; Cutting Speed vc 655 (330-820) SFM; Feed f <=.008 IPR; Depth of Cut ap <=.012 inch; Dry, Wet.


id: cutting-profile-10f8a488c7170d5d
tool_id: NP-CCGW09T304GAWS2
grade_id: grade-983596b5a191be38
source_id: source-140cd7506a42b01f
source_part_number: NP-CCGW09T304GAWS2
source_grade: BC8130
source_geometry: positive 80-degree rhombic CBN insert, GAWS2 edge preparation
source_chipbreaker: none
source_material_label: Hardened Steel
iso_material_group: H
material_subgroup: Hardened steel / interrupted
operation_type: turning
cut_condition: medium
coolant_condition: flood
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 9
source_table_ref: B008 Heat Treated Steel Recommended Cutting Conditions / Coated / BC8130
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
Heat Treated Steel; Interrupted cutting; Coated; BC8130; Cutting Speed vc 390 (195-490) SFM; Feed f <=.008 IPR; Depth of Cut ap <=.012 inch; Dry, Wet.


id: cutting-profile-720d582dacc63bf9
tool_id: NP-CCGW09T304GAWS2
grade_id: grade-750b31a12a8e9818
source_id: source-140cd7506a42b01f
source_part_number: NP-CCGW09T304GAWS2
source_grade: MB8120
source_geometry: positive 80-degree rhombic CBN insert, GAWS2 edge preparation
source_chipbreaker: none
source_material_label: Hardened Steel
iso_material_group: H
material_subgroup: Hardened steel / continuous
operation_type: turning
cut_condition: general
coolant_condition: flood
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 9
source_table_ref: B008 Heat Treated Steel Recommended Cutting Conditions / Non-coated / MB8120
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
Heat Treated Steel; Continuous cutting for general purpose; Non-coated; MB8120; Cutting Speed vc 490 (260-720) SFM; Feed f <=.008 IPR; Depth of Cut ap <=.020 inch; Dry, Wet.


id: cutting-profile-9c7107d7f11f2bba
tool_id: NP-CCGW09T304GAWS2
grade_id: grade-750b31a12a8e9818
source_id: source-140cd7506a42b01f
source_part_number: NP-CCGW09T304GAWS2
source_grade: MB8120
source_geometry: positive 80-degree rhombic CBN insert, GAWS2 edge preparation
source_chipbreaker: none
source_material_label: Hardened Steel
iso_material_group: H
material_subgroup: Hardened steel / medium interrupted
operation_type: turning
cut_condition: medium
coolant_condition: flood
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 9
source_table_ref: B008 Heat Treated Steel Recommended Cutting Conditions / Non-coated / MB8120
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
Heat Treated Steel; Medium interrupted cutting; Non-coated; MB8120; Cutting Speed vc 425 (280-590) SFM; Feed f <=.008 IPR; Depth of Cut ap <=.012 inch; Dry, Wet.


id: cutting-profile-2de2672d8ef41dd9
tool_id: NP-DCGW070204TA2
grade_id: grade-8f972ce11e400a88
source_id: source-140cd7506a42b01f
source_part_number: NP-DCGW070204TA2
source_grade: MB8130
source_geometry: positive 55-degree rhombic CBN insert, TA2 edge preparation
source_chipbreaker: none
source_material_label: Hardened Steel
iso_material_group: H
material_subgroup: Hardened steel / interrupted
operation_type: turning
cut_condition: medium
coolant_condition: flood
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 9
source_table_ref: B008 Heat Treated Steel Recommended Cutting Conditions / Non-coated / MB8130
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
Heat Treated Steel; Interrupted cutting; Non-coated; MB8130; Cutting Speed vc 330 (195-490) SFM; Feed f <=.008 IPR; Depth of Cut ap <=.012 inch; Dry, Wet.


id: cutting-profile-d4feae29e9e31cf9
tool_id: NP-CCGW060202SE2
grade_id: grade-56a2ca31cd74d894
source_id: source-140cd7506a42b01f
source_part_number: NP-CCGW060202SE2
source_grade: MB4120
source_geometry: positive 80-degree rhombic CBN insert, SE2 edge preparation
source_chipbreaker: none
source_material_label: General Sintered Alloy
iso_material_group: O
material_subgroup: General Sintered Alloy
operation_type: turning
cut_condition: general
coolant_condition: unknown
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 9
source_table_ref: B008 Sintered Alloy Recommended Cutting Conditions / General Sintered Alloy
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
Sintered Alloy Recommended Cutting Conditions; Work Material General Sintered Alloy; MB4120; Cutting Speed vc 590 (260-985) SFM; Feed f <=.008 IPR; Depth of Cut ap <=.012 inch. The printed rows state no cutting mode.

notes:
C010A B008 sintered-alloy MB4120 baselines; limits preserved as one-sided maxima; the catalog states no cutting mode for these rows, so coolant remains unknown.


id: cutting-profile-85e83d30119a3425
tool_id: NP-CCGW060202SE2
grade_id: grade-56a2ca31cd74d894
source_id: source-140cd7506a42b01f
source_part_number: NP-CCGW060202SE2
source_grade: MB4120
source_geometry: positive 80-degree rhombic CBN insert, SE2 edge preparation
source_chipbreaker: none
source_material_label: High Density Sintered Alloy
iso_material_group: O
material_subgroup: High Density Sintered Alloy
operation_type: turning
cut_condition: general
coolant_condition: unknown
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 9
source_table_ref: B008 Sintered Alloy Recommended Cutting Conditions / High Density Sintered Alloy
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
Sintered Alloy Recommended Cutting Conditions; Work Material High Density Sintered Alloy; MB4120; Cutting Speed vc 490 (260-755) SFM; Feed f <=.008 IPR; Depth of Cut ap <=.012 inch. The printed rows state no cutting mode.

notes:
C010A B008 sintered-alloy MB4120 baselines; limits preserved as one-sided maxima; the catalog states no cutting mode for these rows, so coolant remains unknown.


id: cutting-profile-9dd770ccf0660b2d
tool_id: NP-CCGW060202SE2
grade_id: grade-56a2ca31cd74d894
source_id: source-140cd7506a42b01f
source_part_number: NP-CCGW060202SE2
source_grade: MB4120
source_geometry: positive 80-degree rhombic CBN insert, SE2 edge preparation
source_chipbreaker: none
source_material_label: Sintered Alloy
iso_material_group: O
material_subgroup: Sintered Alloy
operation_type: turning
cut_condition: general
coolant_condition: unknown
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 9
source_table_ref: B008 Sintered Alloy Recommended Cutting Conditions / Sintered Alloy
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
Sintered Alloy Recommended Cutting Conditions; Work Material Sintered Alloy; MB4120; Cutting Speed vc 425 (260-590) SFM; Feed f <=.008 IPR; Depth of Cut ap <=.012 inch. The printed rows state no cutting mode.

notes:
C010A B008 sintered-alloy MB4120 baselines; limits preserved as one-sided maxima; the catalog states no cutting mode for these rows, so coolant remains unknown.


id: cutting-profile-717957121de451b4
tool_id: DCMW070202
grade_id: grade-36a3196b76fd367b
source_id: source-140cd7506a42b01f
source_part_number: DCMW070202
source_grade: MD220
source_geometry: positive 55-degree rhombic PCD insert
source_chipbreaker: none
source_material_label: Aluminum Alloy (Si < 12%)
iso_material_group: N
material_subgroup: Aluminum Alloy (Si < 12%)
operation_type: turning
cut_condition: general
coolant_condition: unknown
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 16
source_table_ref: B015 PCD Selection Standard, Turning / Aluminum Alloy (Si < 12%)
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
PCD Selection Standard, Turning; Work Material Aluminum Alloy (Si < 12%); MD220; Cutting Speed vc 2625 (655-3935) SFM; Feed f <=.008 IPR; Depth of Cut ap <=.039 inch.

notes:
C010A B015 material-level MD220 baselines; limits preserved as one-sided maxima; the catalog states no cutting mode, so coolant remains unknown.


id: cutting-profile-05abb0810010f3d6
tool_id: DCMW070202
grade_id: grade-36a3196b76fd367b
source_id: source-140cd7506a42b01f
source_part_number: DCMW070202
source_grade: MD220
source_geometry: positive 55-degree rhombic PCD insert
source_chipbreaker: none
source_material_label: Aluminum Alloy (Si >13%)
iso_material_group: N
material_subgroup: Aluminum Alloy (Si >13%)
operation_type: turning
cut_condition: general
coolant_condition: unknown
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 16
source_table_ref: B015 PCD Selection Standard, Turning / Aluminum Alloy (Si >13%)
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
PCD Selection Standard, Turning; Work Material Aluminum Alloy (Si >13%); MD220; Cutting Speed vc 1970 (655-3280) SFM; Feed f <=.008 IPR; Depth of Cut ap <=.039 inch.

notes:
C010A B015 material-level MD220 baselines; limits preserved as one-sided maxima; the catalog states no cutting mode, so coolant remains unknown.


id: cutting-profile-2d0c380e81f4c69a
tool_id: DCMW070202
grade_id: grade-36a3196b76fd367b
source_id: source-140cd7506a42b01f
source_part_number: DCMW070202
source_grade: MD220
source_geometry: positive 55-degree rhombic PCD insert
source_chipbreaker: none
source_material_label: Copper Alloy
iso_material_group: N
material_subgroup: Copper Alloy
operation_type: turning
cut_condition: general
coolant_condition: unknown
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 16
source_table_ref: B015 PCD Selection Standard, Turning / Copper Alloy
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
PCD Selection Standard, Turning; Work Material Copper Alloy; MD220; Cutting Speed vc 2295 (655-3935) SFM; Feed f <=.008 IPR; Depth of Cut ap <=.039 inch.

notes:
C010A B015 material-level MD220 baselines; limits preserved as one-sided maxima; the catalog states no cutting mode, so coolant remains unknown.


id: cutting-profile-de34099d94c16fe6
tool_id: DCMW070202
grade_id: grade-36a3196b76fd367b
source_id: source-140cd7506a42b01f
source_part_number: DCMW070202
source_grade: MD220
source_geometry: positive 55-degree rhombic PCD insert
source_chipbreaker: none
source_material_label: Strengthened Plastic
iso_material_group: O
material_subgroup: Strengthened Plastic
operation_type: turning
cut_condition: general
coolant_condition: unknown
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 16
source_table_ref: B015 PCD Selection Standard, Turning / Strengthened Plastic
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
PCD Selection Standard, Turning; Work Material Strengthened Plastic; MD220; Cutting Speed vc 1970 (330-3280) SFM; Feed f <=.016 IPR; Depth of Cut ap <=.039 inch.


id: cutting-profile-444c51b8bdd08edd
tool_id: DCMW070202
grade_id: grade-36a3196b76fd367b
source_id: source-140cd7506a42b01f
source_part_number: DCMW070202
source_grade: MD220
source_geometry: positive 55-degree rhombic PCD insert
source_chipbreaker: none
source_material_label: Glass Fiber Reinforced Plastic
iso_material_group: O
material_subgroup: Glass Fiber Reinforced Plastic
operation_type: turning
cut_condition: general
coolant_condition: unknown
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 16
source_table_ref: B015 PCD Selection Standard, Turning / Glass Fiber Reinforced Plastic
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
PCD Selection Standard, Turning; Work Material Glass Fiber Reinforced Plastic; MD220; Cutting Speed vc 1640 (330-2625) SFM; Feed f <=.010 IPR; Depth of Cut ap <=.039 inch.


id: cutting-profile-2ce31c496bb983c9
tool_id: DCMW070202
grade_id: grade-36a3196b76fd367b
source_id: source-140cd7506a42b01f
source_part_number: DCMW070202
source_grade: MD220
source_geometry: positive 55-degree rhombic PCD insert
source_chipbreaker: none
source_material_label: Carbon
iso_material_group: O
material_subgroup: Carbon
operation_type: turning
cut_condition: general
coolant_condition: unknown
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 16
source_table_ref: B015 PCD Selection Standard, Turning / Carbon
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
PCD Selection Standard, Turning; Work Material Carbon; MD220; Cutting Speed vc 1310 (330-1970) SFM; Feed f <=.012 IPR; Depth of Cut ap <=.039 inch.


id: cutting-profile-4b746d18249fbf71
tool_id: DCMW070202
grade_id: grade-36a3196b76fd367b
source_id: source-140cd7506a42b01f
source_part_number: DCMW070202
source_grade: MD220
source_geometry: positive 55-degree rhombic PCD insert
source_chipbreaker: none
source_material_label: Ceramics
iso_material_group: O
material_subgroup: Ceramics
operation_type: turning
cut_condition: general
coolant_condition: unknown
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 16
source_table_ref: B015 PCD Selection Standard, Turning / Ceramics
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
PCD Selection Standard, Turning; Work Material Ceramics; MD220; Cutting Speed vc 165 (100-260) SFM; Feed f <=.004 IPR; Depth of Cut ap <=.039 inch.


id: cutting-profile-79dfa8a375dce343
tool_id: DCMW070202
grade_id: grade-36a3196b76fd367b
source_id: source-140cd7506a42b01f
source_part_number: DCMW070202
source_grade: MD220
source_geometry: positive 55-degree rhombic PCD insert
source_chipbreaker: none
source_material_label: Hard Rubber
iso_material_group: O
material_subgroup: Hard Rubber
operation_type: turning
cut_condition: general
coolant_condition: unknown
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 16
source_table_ref: B015 PCD Selection Standard, Turning / Hard Rubber
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
PCD Selection Standard, Turning; Work Material Hard Rubber; MD220; Cutting Speed vc 1970 (985-2625) SFM; Feed f <=.006 IPR; Depth of Cut ap <=.039 inch.


id: cutting-profile-59d572d0fcc71e55
tool_id: DCMW070202
grade_id: grade-36a3196b76fd367b
source_id: source-140cd7506a42b01f
source_part_number: DCMW070202
source_grade: MD220
source_geometry: positive 55-degree rhombic PCD insert
source_chipbreaker: none
source_material_label: Cemented Carbide
iso_material_group: O
material_subgroup: Cemented Carbide
operation_type: turning
cut_condition: general
coolant_condition: unknown
surface_speed_unit: sfm
feed_unit: ipr
depth_of_cut_unit: in
source_page_ref: PDF page 16
source_table_ref: B015 PCD Selection Standard, Turning / Cemented Carbide
extraction_method: pdf_table
verification_status: catalog_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
PCD Selection Standard, Turning; Work Material Cemented Carbide; MD220; Cutting Speed vc 50 (15-65) SFM; Feed f <=.008 IPR; Depth of Cut ap <=.020 inch.


id: cutting-profile-9a662b343f988e6a
tool_id: C2I-E2L-0200-1001-CS
grade_id: grade-648d433b241262ea
source_id: source-7294af15ed921b0e
source_part_number: C2I-E2L-0200-1001-CS1225
source_grade: 1225
source_geometry: CoroCut 1-2 -size E2
source_chipbreaker: CS
source_material_label: P2.1.Z.AN; hardness 175.0 HB
iso_material_group: P
material_subgroup: P2.1.Z.AN
operation_type: parting
cut_condition: finishing
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: Material ID 8290211
source_table_ref: Start values / P2.1.Z.AN
extraction_method: scripted_import
verification_status: manufacturer_verified
reviewer: Probius
reviewed_at: 2026-07-22
source_raw_text:
C2I-E2L-0200-1001-CS1225; material P2.1.Z.AN, hardness 175.0 HB; feed min/nom/max 0.03/0.06/0.1 mm/r; speed min/nom/max 200.0/230.0/290.0 m/min; Primary (Radial) KAPR 80.0 deg; maximum cutting depth CDX 19.19 mm.

notes:
Feed nominal value is retained in the evidence excerpt because the current profile schema stores only feed min/max. CDX is the manufacturer-stated physical maximum cutting depth, not a preferred starting depth.


id: cutting-profile-532f744ca22b1b5d
tool_id: DCGT-07-02-01-UM-1025
grade_id: grade-a3203f1bfe0d146c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 01-UM 1025
source_grade: 1025
source_geometry: DCGT 07 02 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730437/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":420.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":0.7,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.01,"nom":0.02,"unit":"mm/r"},"hex":{"max":0.06,"min":0.01,"nom":0.02,"unit":"mm/r"},"vc":{"max":50.0,"min":36.0,"nom":45.0,"unit":"m/min"}}}

notes:
Greg selected all Sandvik CoroTurn 107 DCGT inserts as the standing family scope and supplied material ID 5730446 as the seed. This row is one exact manufacturer product admitted by the adapter's identity and family gates.


id: cutting-profile-e2478b09faf19523
tool_id: DCGT-07-02-01-UM-1105
grade_id: grade-209be738bc07fc2a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 01-UM 1105
source_grade: 1105
source_geometry: DCGT 07 02 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730419/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":0.7,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.01,"nom":0.02,"unit":"mm/r"},"hex":{"max":0.06,"min":0.01,"nom":0.02,"unit":"mm/r"},"vc":{"max":80.0,"min":80.0,"nom":80.0,"unit":"m/min"}}}

notes:
Greg selected all Sandvik CoroTurn 107 DCGT inserts as the standing family scope and supplied material ID 5730446 as the seed. This row is one exact manufacturer product admitted by the adapter's identity and family gates.


id: cutting-profile-1d1efc79de82b5c9
tool_id: DCGT-07-02-01-UM-1105
grade_id: grade-209be738bc07fc2a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 01-UM 1105
source_grade: 1105
source_geometry: DCGT 07 02 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730419/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":2,"startValues":{"ap":{"max":1.0,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.08,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.08,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":260.0,"min":230.0,"nom":260.0,"unit":"m/min"}}}

notes:
Greg selected all Sandvik CoroTurn 107 DCGT inserts as the standing family scope and supplied material ID 5730446 as the seed. This row is one exact manufacturer product admitted by the adapter's identity and family gates.


id: cutting-profile-e4357bba5218d05e
tool_id: DCGT-07-02-01-UM-1115
grade_id: grade-175c41879e982175
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 01-UM 1115
source_grade: 1115
source_geometry: DCGT 07 02 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730420/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":1.0,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.08,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.08,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":260.0,"min":230.0,"nom":260.0,"unit":"m/min"}}}


id: cutting-profile-50d8ff07a1fee44c
tool_id: DCGT-07-02-01-UM-1115
grade_id: grade-175c41879e982175
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 01-UM 1115
source_grade: 1115
source_geometry: DCGT 07 02 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730420/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":0.7,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.01,"nom":0.02,"unit":"mm/r"},"hex":{"max":0.06,"min":0.01,"nom":0.02,"unit":"mm/r"},"vc":{"max":60.0,"min":60.0,"nom":60.0,"unit":"m/min"}}}


id: cutting-profile-d18bd211e4e3fbac
tool_id: DCGT-07-02-01-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 01-UM 1125
source_grade: 1125
source_geometry: DCGT 07 02 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730421/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":1.0,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.08,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.08,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":205.0,"min":205.0,"nom":205.0,"unit":"m/min"}}}


id: cutting-profile-2e3c5a8860b8b736
tool_id: DCGT-07-02-01-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 01-UM 1125
source_grade: 1125
source_geometry: DCGT 07 02 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730421/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":0.7,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.01,"nom":0.02,"unit":"mm/r"},"hex":{"max":0.06,"min":0.01,"nom":0.02,"unit":"mm/r"},"vc":{"max":27.0,"min":27.0,"nom":27.0,"unit":"m/min"}}}


id: cutting-profile-8eebd2678cf87234
tool_id: DCGT-07-02-01-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 01-UM 1125
source_grade: 1125
source_geometry: DCGT 07 02 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: N1.3.C.AG
iso_material_group: N
material_subgroup: N1.3.C.AG / 90 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730421/response/product/CuttingOperations/0/materials/2
source_table_ref: product.CuttingOperations[0].materials[2]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":90.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"N","materialReference":"N1.3.C.AG","sortOrder":3,"startValues":{"ap":{"max":1.0,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":1000.0,"min":100.0,"nom":810.0,"unit":"m/min"}}}


id: cutting-profile-277788841783df9e
tool_id: DCGT-07-02-01-UM-1205
grade_id: grade-f084825afeb7e89d
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 01-UM 1205
source_grade: 1205
source_geometry: DCGT 07 02 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/8432102/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":0.7,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.01,"nom":0.02,"unit":"mm/r"},"hex":{"max":0.06,"min":0.01,"nom":0.02,"unit":"mm/r"},"vc":{"max":110.0,"min":110.0,"nom":110.0,"unit":"m/min"}}}


id: cutting-profile-339a86c9af6d4126
tool_id: DCGT-07-02-01-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 01-UM H13A
source_grade: H13A
source_geometry: DCGT 07 02 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730436/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":420.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":0.7,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.01,"nom":0.02,"unit":"mm/r"},"hex":{"max":0.06,"min":0.01,"nom":0.02,"unit":"mm/r"},"vc":{"max":34.0,"min":34.0,"nom":34.0,"unit":"m/min"}}}


id: cutting-profile-9aa8519a00e74459
tool_id: DCGT-07-02-01-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 01-UM H13A
source_grade: H13A
source_geometry: DCGT 07 02 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: K2.2.C.UT
iso_material_group: K
material_subgroup: K2.2.C.UT / 245 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730436/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":245.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"K","materialReference":"K2.2.C.UT","sortOrder":2,"startValues":{"ap":{"max":1.0,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":130.0,"min":130.0,"nom":130.0,"unit":"m/min"}}}


id: cutting-profile-ba117d603d8a94ee
tool_id: DCGT-07-02-01-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 01-UM H13A
source_grade: H13A
source_geometry: DCGT 07 02 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: N1.3.C.AG
iso_material_group: N
material_subgroup: N1.3.C.AG / 90 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730436/response/product/CuttingOperations/0/materials/2
source_table_ref: product.CuttingOperations[0].materials[2]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":90.0,"hardnessUnit":"HB","lifeTime":1800.0,"material":"N","materialReference":"N1.3.C.AG","sortOrder":3,"startValues":{"ap":{"max":1.0,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":2400.0,"min":240.0,"nom":1900.0,"unit":"m/min"}}}


id: cutting-profile-e5629c4b4e728861
tool_id: DCGT-07-02-02-UM-1025
grade_id: grade-a3203f1bfe0d146c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 02-UM 1025
source_grade: 1025
source_geometry: DCGT 07 02 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730423/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":420.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":1.05,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.08,"min":0.02,"nom":0.05,"unit":"mm/r"},"hex":{"max":0.08,"min":0.02,"nom":0.05,"unit":"mm/r"},"vc":{"max":45.0,"min":33.0,"nom":37.0,"unit":"m/min"}}}


id: cutting-profile-af081d5e1e149f41
tool_id: DCGT-07-02-02-UM-1105
grade_id: grade-209be738bc07fc2a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 02-UM 1105
source_grade: 1105
source_geometry: DCGT 07 02 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730424/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":1.05,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.08,"min":0.02,"nom":0.05,"unit":"mm/r"},"hex":{"max":0.08,"min":0.02,"nom":0.05,"unit":"mm/r"},"vc":{"max":80.0,"min":70.0,"nom":80.0,"unit":"m/min"}}}


id: cutting-profile-75cef19b33b23865
tool_id: DCGT-07-02-02-UM-1115
grade_id: grade-175c41879e982175
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 02-UM 1115
source_grade: 1115
source_geometry: DCGT 07 02 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730425/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":1.5,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.16,"min":0.02,"nom":0.07,"unit":"mm/r"},"hex":{"max":0.16,"min":0.02,"nom":0.07,"unit":"mm/r"},"vc":{"max":255.0,"min":185.0,"nom":235.0,"unit":"m/min"}}}


id: cutting-profile-f97190b774b23cb3
tool_id: DCGT-07-02-02-UM-1115
grade_id: grade-175c41879e982175
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 02-UM 1115
source_grade: 1115
source_geometry: DCGT 07 02 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730425/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":1.05,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.08,"min":0.02,"nom":0.05,"unit":"mm/r"},"hex":{"max":0.08,"min":0.02,"nom":0.05,"unit":"mm/r"},"vc":{"max":60.0,"min":55.0,"nom":60.0,"unit":"m/min"}}}


id: cutting-profile-dda3844cafeb4015
tool_id: DCGT-07-02-02-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 02-UM 1125
source_grade: 1125
source_geometry: DCGT 07 02 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730426/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":1.5,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.16,"min":0.02,"nom":0.07,"unit":"mm/r"},"hex":{"max":0.16,"min":0.02,"nom":0.07,"unit":"mm/r"},"vc":{"max":200.0,"min":180.0,"nom":200.0,"unit":"m/min"}}}


id: cutting-profile-9a4b2bc7b2714571
tool_id: DCGT-07-02-02-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 02-UM 1125
source_grade: 1125
source_geometry: DCGT 07 02 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730426/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":1.05,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.08,"min":0.02,"nom":0.05,"unit":"mm/r"},"hex":{"max":0.08,"min":0.02,"nom":0.05,"unit":"mm/r"},"vc":{"max":32.0,"min":32.0,"nom":32.0,"unit":"m/min"}}}


id: cutting-profile-1558085eccecdf2a
tool_id: DCGT-07-02-02-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 02-UM 1125
source_grade: 1125
source_geometry: DCGT 07 02 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: N1.3.C.AG
iso_material_group: N
material_subgroup: N1.3.C.AG / 90 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730426/response/product/CuttingOperations/0/materials/2
source_table_ref: product.CuttingOperations[0].materials[2]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":90.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"N","materialReference":"N1.3.C.AG","sortOrder":3,"startValues":{"ap":{"max":1.5,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.12,"min":0.02,"nom":0.07,"unit":"mm/r"},"hex":{"max":0.12,"min":0.02,"nom":0.07,"unit":"mm/r"},"vc":{"max":800.0,"min":80.0,"nom":640.0,"unit":"m/min"}}}


id: cutting-profile-81ac967eb3a268a7
tool_id: DCGT-07-02-02-UM-1205
grade_id: grade-f084825afeb7e89d
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 02-UM 1205
source_grade: 1205
source_geometry: DCGT 07 02 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/8432103/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":1.05,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.08,"min":0.02,"nom":0.05,"unit":"mm/r"},"hex":{"max":0.08,"min":0.02,"nom":0.05,"unit":"mm/r"},"vc":{"max":110.0,"min":100.0,"nom":110.0,"unit":"m/min"}}}


id: cutting-profile-9abc647a4bfc4e5a
tool_id: DCGT-07-02-02-UM-1515
grade_id: grade-e67da29526bc8118
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 02-UM 1515
source_grade: 1515
source_geometry: DCGT 07 02 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: P2.1.Z.AN
iso_material_group: P
material_subgroup: P2.1.Z.AN / 175 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730427/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":175.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"P","materialReference":"P2.1.Z.AN","sortOrder":1,"startValues":{"ap":{"max":1.5,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.12,"min":0.02,"nom":0.07,"unit":"mm/r"},"hex":{"max":0.12,"min":0.02,"nom":0.07,"unit":"mm/r"},"vc":{"max":305.0,"min":290.0,"nom":305.0,"unit":"m/min"}}}


id: cutting-profile-0cf32fba439e037e
tool_id: DCGT-07-02-02-UM-1515
grade_id: grade-e67da29526bc8118
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 02-UM 1515
source_grade: 1515
source_geometry: DCGT 07 02 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730427/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":2,"startValues":{"ap":{"max":1.5,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.16,"min":0.02,"nom":0.07,"unit":"mm/r"},"hex":{"max":0.16,"min":0.02,"nom":0.07,"unit":"mm/r"},"vc":{"max":240.0,"min":220.0,"nom":240.0,"unit":"m/min"}}}


id: cutting-profile-4bc8791451d72437
tool_id: DCGT-07-02-02-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 02-UM H13A
source_grade: H13A
source_geometry: DCGT 07 02 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730422/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":420.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":1.05,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.08,"min":0.02,"nom":0.05,"unit":"mm/r"},"hex":{"max":0.08,"min":0.02,"nom":0.05,"unit":"mm/r"},"vc":{"max":38.0,"min":38.0,"nom":38.0,"unit":"m/min"}}}


id: cutting-profile-2bb128da87cdec63
tool_id: DCGT-07-02-02-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 02-UM H13A
source_grade: H13A
source_geometry: DCGT 07 02 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: K2.2.C.UT
iso_material_group: K
material_subgroup: K2.2.C.UT / 245 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730422/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":245.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"K","materialReference":"K2.2.C.UT","sortOrder":2,"startValues":{"ap":{"max":1.5,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.12,"min":0.02,"nom":0.07,"unit":"mm/r"},"hex":{"max":0.12,"min":0.02,"nom":0.07,"unit":"mm/r"},"vc":{"max":130.0,"min":130.0,"nom":130.0,"unit":"m/min"}}}


id: cutting-profile-5f0c234b174a3432
tool_id: DCGT-07-02-02-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 02-UM H13A
source_grade: H13A
source_geometry: DCGT 07 02 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: N1.3.C.AG
iso_material_group: N
material_subgroup: N1.3.C.AG / 90 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730422/response/product/CuttingOperations/0/materials/2
source_table_ref: product.CuttingOperations[0].materials[2]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":90.0,"hardnessUnit":"HB","lifeTime":1800.0,"material":"N","materialReference":"N1.3.C.AG","sortOrder":3,"startValues":{"ap":{"max":1.5,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.12,"min":0.02,"nom":0.07,"unit":"mm/r"},"hex":{"max":0.12,"min":0.02,"nom":0.07,"unit":"mm/r"},"vc":{"max":2400.0,"min":240.0,"nom":1900.0,"unit":"m/min"}}}


id: cutting-profile-c06e7922d0f8d34d
tool_id: DCGT-07-02-04-UM-1025
grade_id: grade-a3203f1bfe0d146c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 04-UM 1025
source_grade: 1025
source_geometry: DCGT 07 02 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730430/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":420.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":1.75,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.18,"min":0.08,"nom":0.11,"unit":"mm/r"},"hex":{"max":0.18,"min":0.08,"nom":0.1,"unit":"mm/r"},"vc":{"max":33.0,"min":27.0,"nom":31.0,"unit":"m/min"}}}


id: cutting-profile-c68fdd7b96512f66
tool_id: DCGT-07-02-04-UM-1105
grade_id: grade-209be738bc07fc2a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 04-UM 1105
source_grade: 1105
source_geometry: DCGT 07 02 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730438/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":1.75,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.18,"min":0.08,"nom":0.11,"unit":"mm/r"},"hex":{"max":0.18,"min":0.08,"nom":0.1,"unit":"mm/r"},"vc":{"max":75.0,"min":40.0,"nom":65.0,"unit":"m/min"}}}


id: cutting-profile-507a0969880fe7fa
tool_id: DCGT-07-02-04-UM-1115
grade_id: grade-175c41879e982175
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 04-UM 1115
source_grade: 1115
source_geometry: DCGT 07 02 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730449/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":2.5,"min":0.3,"nom":1.0,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":230.0,"min":155.0,"nom":190.0,"unit":"m/min"}}}


id: cutting-profile-47ece275e58e5206
tool_id: DCGT-07-02-04-UM-1115
grade_id: grade-175c41879e982175
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 04-UM 1115
source_grade: 1115
source_geometry: DCGT 07 02 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730449/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":1.75,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.18,"min":0.08,"nom":0.11,"unit":"mm/r"},"hex":{"max":0.18,"min":0.08,"nom":0.1,"unit":"mm/r"},"vc":{"max":55.0,"min":32.0,"nom":50.0,"unit":"m/min"}}}


id: cutting-profile-8150792fb285350a
tool_id: DCGT-07-02-04-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 04-UM 1125
source_grade: 1125
source_geometry: DCGT 07 02 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730451/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":2.5,"min":0.3,"nom":1.0,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":205.0,"min":145.0,"nom":185.0,"unit":"m/min"}}}


id: cutting-profile-db0ba644f1f2e074
tool_id: DCGT-07-02-04-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 04-UM 1125
source_grade: 1125
source_geometry: DCGT 07 02 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730451/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":1.75,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.18,"min":0.08,"nom":0.11,"unit":"mm/r"},"hex":{"max":0.18,"min":0.08,"nom":0.1,"unit":"mm/r"},"vc":{"max":34.0,"min":33.0,"nom":34.0,"unit":"m/min"}}}


id: cutting-profile-8d412740505b47a3
tool_id: DCGT-07-02-04-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 04-UM 1125
source_grade: 1125
source_geometry: DCGT 07 02 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: N1.3.C.AG
iso_material_group: N
material_subgroup: N1.3.C.AG / 90 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730451/response/product/CuttingOperations/0/materials/2
source_table_ref: product.CuttingOperations[0].materials[2]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":90.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"N","materialReference":"N1.3.C.AG","sortOrder":3,"startValues":{"ap":{"max":2.5,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":640.0,"min":65.0,"nom":510.0,"unit":"m/min"}}}


id: cutting-profile-492be86a918ed9ff
tool_id: DCGT-07-02-04-UM-1205
grade_id: grade-f084825afeb7e89d
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 04-UM 1205
source_grade: 1205
source_geometry: DCGT 07 02 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/8432104/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":1.75,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.18,"min":0.08,"nom":0.11,"unit":"mm/r"},"hex":{"max":0.18,"min":0.08,"nom":0.1,"unit":"mm/r"},"vc":{"max":105.0,"min":60.0,"nom":90.0,"unit":"m/min"}}}


id: cutting-profile-75e70f0d330df1c5
tool_id: DCGT-07-02-04-UM-1515
grade_id: grade-e67da29526bc8118
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 04-UM 1515
source_grade: 1515
source_geometry: DCGT 07 02 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: P2.1.Z.AN
iso_material_group: P
material_subgroup: P2.1.Z.AN / 175 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730452/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":175.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"P","materialReference":"P2.1.Z.AN","sortOrder":1,"startValues":{"ap":{"max":2.5,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":310.0,"min":165.0,"nom":260.0,"unit":"m/min"}}}


id: cutting-profile-16fe21595a0da8fc
tool_id: DCGT-07-02-04-UM-1515
grade_id: grade-e67da29526bc8118
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 04-UM 1515
source_grade: 1515
source_geometry: DCGT 07 02 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730452/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":2,"startValues":{"ap":{"max":2.5,"min":0.3,"nom":1.0,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":245.0,"min":170.0,"nom":225.0,"unit":"m/min"}}}


id: cutting-profile-439685fd4047b9d6
tool_id: DCGT-07-02-04-UM-2035
grade_id: grade-3ec2a364456ff15b
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 04-UM 2035
source_grade: 2035
source_geometry: DCGT 07 02 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730453/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":2.5,"min":0.3,"nom":1.0,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":220.0,"min":160.0,"nom":190.0,"unit":"m/min"}}}


id: cutting-profile-abfe799dbe2e1b51
tool_id: DCGT-07-02-04-UM-5015
grade_id: grade-3ec908b360fb0d8c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 04-UM 5015
source_grade: 5015
source_geometry: DCGT 07 02 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: P2.1.Z.AN
iso_material_group: P
material_subgroup: P2.1.Z.AN / 175 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730454/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":175.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"P","materialReference":"P2.1.Z.AN","sortOrder":1,"startValues":{"ap":{"max":2.5,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":380.0,"min":360.0,"nom":370.0,"unit":"m/min"}}}


id: cutting-profile-f4f2ce3181111f88
tool_id: DCGT-07-02-04-UM-5015
grade_id: grade-3ec908b360fb0d8c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 04-UM 5015
source_grade: 5015
source_geometry: DCGT 07 02 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: K2.2.C.UT
iso_material_group: K
material_subgroup: K2.2.C.UT / 245 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730454/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":245.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"K","materialReference":"K2.2.C.UT","sortOrder":2,"startValues":{"ap":{"max":2.5,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":270.0,"min":205.0,"nom":235.0,"unit":"m/min"}}}


id: cutting-profile-b238d12fae5a7d2a
tool_id: DCGT-07-02-04-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 04-UM H13A
source_grade: H13A
source_geometry: DCGT 07 02 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730428/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":420.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":1.75,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.18,"min":0.08,"nom":0.11,"unit":"mm/r"},"hex":{"max":0.18,"min":0.08,"nom":0.1,"unit":"mm/r"},"vc":{"max":40.0,"min":38.0,"nom":40.0,"unit":"m/min"}}}


id: cutting-profile-f159729e7f3fd658
tool_id: DCGT-07-02-04-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 04-UM H13A
source_grade: H13A
source_geometry: DCGT 07 02 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: K2.2.C.UT
iso_material_group: K
material_subgroup: K2.2.C.UT / 245 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730428/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":245.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"K","materialReference":"K2.2.C.UT","sortOrder":2,"startValues":{"ap":{"max":2.5,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":130.0,"min":110.0,"nom":125.0,"unit":"m/min"}}}


id: cutting-profile-7b2464211f82ff5f
tool_id: DCGT-07-02-04-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 04-UM H13A
source_grade: H13A
source_geometry: DCGT 07 02 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: N1.3.C.AG
iso_material_group: N
material_subgroup: N1.3.C.AG / 90 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730428/response/product/CuttingOperations/0/materials/2
source_table_ref: product.CuttingOperations[0].materials[2]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":90.0,"hardnessUnit":"HB","lifeTime":1800.0,"material":"N","materialReference":"N1.3.C.AG","sortOrder":3,"startValues":{"ap":{"max":2.5,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":2400.0,"min":240.0,"nom":1900.0,"unit":"m/min"}}}


id: cutting-profile-4f05ca83f319eabf
tool_id: DCGT-07-02-08-UM-1025
grade_id: grade-a3203f1bfe0d146c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 08-UM 1025
source_grade: 1025
source_geometry: DCGT 07 02 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730457/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":420.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":1.75,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.25,"min":0.12,"nom":0.14,"unit":"mm/r"},"hex":{"max":0.24,"min":0.12,"nom":0.14,"unit":"mm/r"},"vc":{"max":30.0,"min":24.0,"nom":29.0,"unit":"m/min"}}}


id: cutting-profile-98667f8dbb0364be
tool_id: DCGT-07-02-08-UM-1105
grade_id: grade-209be738bc07fc2a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 08-UM 1105
source_grade: 1105
source_geometry: DCGT 07 02 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/6075375/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":1.75,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.25,"min":0.12,"nom":0.14,"unit":"mm/r"},"hex":{"max":0.24,"min":0.12,"nom":0.14,"unit":"mm/r"},"vc":{"max":60.0,"min":28.0,"nom":50.0,"unit":"m/min"}}}


id: cutting-profile-aa8d25fda03f8dcb
tool_id: DCGT-07-02-08-UM-1105
grade_id: grade-209be738bc07fc2a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 08-UM 1105
source_grade: 1105
source_geometry: DCGT 07 02 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/6075375/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":2,"startValues":{"ap":{"max":2.5,"min":0.3,"nom":1.0,"unit":"mm"},"fn":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":205.0,"min":130.0,"nom":170.0,"unit":"m/min"}}}


id: cutting-profile-ccd94a8b77ecd493
tool_id: DCGT-07-02-08-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 08-UM 1125
source_grade: 1125
source_geometry: DCGT 07 02 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730439/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":2.5,"min":0.3,"nom":1.0,"unit":"mm"},"fn":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":200.0,"min":110.0,"nom":165.0,"unit":"m/min"}}}


id: cutting-profile-4d2a3827e82bcee4
tool_id: DCGT-07-02-08-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 08-UM 1125
source_grade: 1125
source_geometry: DCGT 07 02 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730439/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":1.75,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.25,"min":0.12,"nom":0.14,"unit":"mm/r"},"hex":{"max":0.24,"min":0.12,"nom":0.14,"unit":"mm/r"},"vc":{"max":35.0,"min":29.0,"nom":35.0,"unit":"m/min"}}}


id: cutting-profile-8d23c2d4e8cbe861
tool_id: DCGT-07-02-08-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 08-UM 1125
source_grade: 1125
source_geometry: DCGT 07 02 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: N1.3.C.AG
iso_material_group: N
material_subgroup: N1.3.C.AG / 90 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730439/response/product/CuttingOperations/0/materials/2
source_table_ref: product.CuttingOperations[0].materials[2]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":90.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"N","materialReference":"N1.3.C.AG","sortOrder":3,"startValues":{"ap":{"max":2.5,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":590.0,"min":60.0,"nom":475.0,"unit":"m/min"}}}


id: cutting-profile-ff8f2d37e9ad47f3
tool_id: DCGT-07-02-08-UM-1205
grade_id: grade-f084825afeb7e89d
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 08-UM 1205
source_grade: 1205
source_geometry: DCGT 07 02 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/8432105/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":2.5,"min":0.3,"nom":1.0,"unit":"mm"},"fn":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":205.0,"min":130.0,"nom":170.0,"unit":"m/min"}}}


id: cutting-profile-8e786c69b6e56d73
tool_id: DCGT-07-02-08-UM-1205
grade_id: grade-f084825afeb7e89d
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 08-UM 1205
source_grade: 1205
source_geometry: DCGT 07 02 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/8432105/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":1.75,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.25,"min":0.12,"nom":0.14,"unit":"mm/r"},"hex":{"max":0.24,"min":0.12,"nom":0.14,"unit":"mm/r"},"vc":{"max":80.0,"min":39.0,"nom":75.0,"unit":"m/min"}}}


id: cutting-profile-2f8dc7fc2ede6bc5
tool_id: DCGT-07-02-08-UM-1515
grade_id: grade-e67da29526bc8118
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 08-UM 1515
source_grade: 1515
source_geometry: DCGT 07 02 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: P2.1.Z.AN
iso_material_group: P
material_subgroup: P2.1.Z.AN / 175 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730440/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":175.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"P","materialReference":"P2.1.Z.AN","sortOrder":1,"startValues":{"ap":{"max":2.5,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":290.0,"min":105.0,"nom":205.0,"unit":"m/min"}}}


id: cutting-profile-86a3996e0a63503b
tool_id: DCGT-07-02-08-UM-1515
grade_id: grade-e67da29526bc8118
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 08-UM 1515
source_grade: 1515
source_geometry: DCGT 07 02 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730440/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":2,"startValues":{"ap":{"max":2.5,"min":0.3,"nom":1.0,"unit":"mm"},"fn":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":235.0,"min":130.0,"nom":195.0,"unit":"m/min"}}}


id: cutting-profile-2798fc5517e7b733
tool_id: DCGT-07-02-08-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 08-UM H13A
source_grade: H13A
source_geometry: DCGT 07 02 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730456/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":420.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":1.75,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.25,"min":0.12,"nom":0.14,"unit":"mm/r"},"hex":{"max":0.24,"min":0.12,"nom":0.14,"unit":"mm/r"},"vc":{"max":40.0,"min":33.0,"nom":40.0,"unit":"m/min"}}}


id: cutting-profile-0f2edd4ed0e452b2
tool_id: DCGT-07-02-08-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 08-UM H13A
source_grade: H13A
source_geometry: DCGT 07 02 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: K2.2.C.UT
iso_material_group: K
material_subgroup: K2.2.C.UT / 245 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730456/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":245.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"K","materialReference":"K2.2.C.UT","sortOrder":2,"startValues":{"ap":{"max":2.5,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":130.0,"min":100.0,"nom":120.0,"unit":"m/min"}}}


id: cutting-profile-e10355603a643f45
tool_id: DCGT-07-02-08-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 07 02 08-UM H13A
source_grade: H13A
source_geometry: DCGT 07 02 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: N1.3.C.AG
iso_material_group: N
material_subgroup: N1.3.C.AG / 90 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730456/response/product/CuttingOperations/0/materials/2
source_table_ref: product.CuttingOperations[0].materials[2]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":90.0,"hardnessUnit":"HB","lifeTime":1800.0,"material":"N","materialReference":"N1.3.C.AG","sortOrder":3,"startValues":{"ap":{"max":2.5,"min":0.5,"nom":1.0,"unit":"mm"},"fn":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":2400.0,"min":240.0,"nom":1900.0,"unit":"m/min"}}}


id: cutting-profile-0ea64b212ba02b49
tool_id: DCGT-11-T3-01-UM-1115
grade_id: grade-175c41879e982175
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 01-UM 1115
source_grade: 1115
source_geometry: DCGT 11 T3 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730447/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":1.0,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":260.0,"min":240.0,"nom":260.0,"unit":"m/min"}}}


id: cutting-profile-751b05629326beef
tool_id: DCGT-11-T3-01-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 01-UM 1125
source_grade: 1125
source_geometry: DCGT 11 T3 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730448/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":1.0,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":195.0,"min":195.0,"nom":195.0,"unit":"m/min"}}}


id: cutting-profile-86c285907c458895
tool_id: DCGT-11-T3-01-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 01-UM 1125
source_grade: 1125
source_geometry: DCGT 11 T3 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: N1.3.C.AG
iso_material_group: N
material_subgroup: N1.3.C.AG / 90 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730448/response/product/CuttingOperations/0/materials/2
source_table_ref: product.CuttingOperations[0].materials[2]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":90.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"N","materialReference":"N1.3.C.AG","sortOrder":3,"startValues":{"ap":{"max":1.0,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.08,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.08,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":1000.0,"min":100.0,"nom":810.0,"unit":"m/min"}}}


id: cutting-profile-6890ddda525ea4cc
tool_id: DCGT-11-T3-01-UM-5015
grade_id: grade-3ec908b360fb0d8c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 01-UM 5015
source_grade: 5015
source_geometry: DCGT 11 T3 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: P2.1.Z.AN
iso_material_group: P
material_subgroup: P2.1.Z.AN / 175 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730338/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":175.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"P","materialReference":"P2.1.Z.AN","sortOrder":1,"startValues":{"ap":{"max":1.0,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":400.0,"min":385.0,"nom":390.0,"unit":"m/min"}}}


id: cutting-profile-29dc75cf5598c169
tool_id: DCGT-11-T3-01-UM-5015
grade_id: grade-3ec908b360fb0d8c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 01-UM 5015
source_grade: 5015
source_geometry: DCGT 11 T3 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: K2.2.C.UT
iso_material_group: K
material_subgroup: K2.2.C.UT / 245 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730338/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":245.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"K","materialReference":"K2.2.C.UT","sortOrder":2,"startValues":{"ap":{"max":1.0,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":295.0,"min":280.0,"nom":295.0,"unit":"m/min"}}}


id: cutting-profile-0019d7df0663f831
tool_id: DCGT-11-T3-01-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 01-UM H13A
source_grade: H13A
source_geometry: DCGT 11 T3 01, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: N1.3.C.AG
iso_material_group: N
material_subgroup: N1.3.C.AG / 90 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730444/response/product/CuttingOperations/0/materials/2
source_table_ref: product.CuttingOperations[0].materials[2]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":90.0,"hardnessUnit":"HB","lifeTime":1800.0,"material":"N","materialReference":"N1.3.C.AG","sortOrder":3,"startValues":{"ap":{"max":1.0,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.08,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.08,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":2400.0,"min":240.0,"nom":1900.0,"unit":"m/min"}}}


id: cutting-profile-5c72796c876c4544
tool_id: DCGT-11-T3-02-UM-1025
grade_id: grade-a3203f1bfe0d146c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 02-UM 1025
source_grade: 1025
source_geometry: DCGT 11 T3 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730413/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":420.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":1.05,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.08,"min":0.01,"nom":0.02,"unit":"mm/r"},"hex":{"max":0.08,"min":0.01,"nom":0.02,"unit":"mm/r"},"vc":{"max":50.0,"min":33.0,"nom":45.0,"unit":"m/min"}}}


id: cutting-profile-d4de0d31ec88976e
tool_id: DCGT-11-T3-02-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 02-UM 1125
source_grade: 1125
source_geometry: DCGT 11 T3 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730416/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":1.5,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":195.0,"min":195.0,"nom":195.0,"unit":"m/min"}}}


id: cutting-profile-1e0417c505b05909
tool_id: DCGT-11-T3-02-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 02-UM 1125
source_grade: 1125
source_geometry: DCGT 11 T3 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730416/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":1.05,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.08,"min":0.01,"nom":0.02,"unit":"mm/r"},"hex":{"max":0.08,"min":0.01,"nom":0.02,"unit":"mm/r"},"vc":{"max":32.0,"min":32.0,"nom":32.0,"unit":"m/min"}}}


id: cutting-profile-0fc3a5297f806349
tool_id: DCGT-11-T3-02-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 02-UM 1125
source_grade: 1125
source_geometry: DCGT 11 T3 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: N1.3.C.AG
iso_material_group: N
material_subgroup: N1.3.C.AG / 90 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730416/response/product/CuttingOperations/0/materials/2
source_table_ref: product.CuttingOperations[0].materials[2]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":90.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"N","materialReference":"N1.3.C.AG","sortOrder":3,"startValues":{"ap":{"max":1.5,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.08,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.08,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":1000.0,"min":100.0,"nom":810.0,"unit":"m/min"}}}


id: cutting-profile-a3ab37fae00971ba
tool_id: DCGT-11-T3-02-UM-1205
grade_id: grade-f084825afeb7e89d
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 02-UM 1205
source_grade: 1205
source_geometry: DCGT 11 T3 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/8432107/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":1.05,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.08,"min":0.01,"nom":0.02,"unit":"mm/r"},"hex":{"max":0.08,"min":0.01,"nom":0.02,"unit":"mm/r"},"vc":{"max":100.0,"min":100.0,"nom":100.0,"unit":"m/min"}}}


id: cutting-profile-d07926ea0cce5ce8
tool_id: DCGT-11-T3-02-UM-1515
grade_id: grade-e67da29526bc8118
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 02-UM 1515
source_grade: 1515
source_geometry: DCGT 11 T3 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: P2.1.Z.AN
iso_material_group: P
material_subgroup: P2.1.Z.AN / 175 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730417/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":175.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"P","materialReference":"P2.1.Z.AN","sortOrder":1,"startValues":{"ap":{"max":1.5,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.06,"min":0.02,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.06,"min":0.02,"nom":0.03,"unit":"mm/r"},"vc":{"max":290.0,"min":290.0,"nom":290.0,"unit":"m/min"}}}


id: cutting-profile-0b0f911c0a4c754f
tool_id: DCGT-11-T3-02-UM-1515
grade_id: grade-e67da29526bc8118
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 02-UM 1515
source_grade: 1515
source_geometry: DCGT 11 T3 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730417/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":2,"startValues":{"ap":{"max":1.5,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.02,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.06,"min":0.02,"nom":0.03,"unit":"mm/r"},"vc":{"max":235.0,"min":235.0,"nom":235.0,"unit":"m/min"}}}


id: cutting-profile-76acc3c941f1a321
tool_id: DCGT-11-T3-02-UM-2035
grade_id: grade-3ec2a364456ff15b
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 02-UM 2035
source_grade: 2035
source_geometry: DCGT 11 T3 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730339/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":1.5,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.02,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.06,"min":0.02,"nom":0.03,"unit":"mm/r"},"vc":{"max":225.0,"min":225.0,"nom":225.0,"unit":"m/min"}}}


id: cutting-profile-e54dabdbd293f606
tool_id: DCGT-11-T3-02-UM-5015
grade_id: grade-3ec908b360fb0d8c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 02-UM 5015
source_grade: 5015
source_geometry: DCGT 11 T3 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: P2.1.Z.AN
iso_material_group: P
material_subgroup: P2.1.Z.AN / 175 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730400/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":175.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"P","materialReference":"P2.1.Z.AN","sortOrder":1,"startValues":{"ap":{"max":1.5,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":400.0,"min":385.0,"nom":390.0,"unit":"m/min"}}}


id: cutting-profile-8060078871fb7a99
tool_id: DCGT-11-T3-02-UM-5015
grade_id: grade-3ec908b360fb0d8c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 02-UM 5015
source_grade: 5015
source_geometry: DCGT 11 T3 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: K2.2.C.UT
iso_material_group: K
material_subgroup: K2.2.C.UT / 245 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730400/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":245.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"K","materialReference":"K2.2.C.UT","sortOrder":2,"startValues":{"ap":{"max":1.5,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.12,"min":0.02,"nom":0.07,"unit":"mm/r"},"hex":{"max":0.12,"min":0.02,"nom":0.07,"unit":"mm/r"},"vc":{"max":290.0,"min":250.0,"nom":275.0,"unit":"m/min"}}}


id: cutting-profile-e080e69da51fe258
tool_id: DCGT-11-T3-02-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 02-UM H13A
source_grade: H13A
source_geometry: DCGT 11 T3 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730412/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":420.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":1.05,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.08,"min":0.01,"nom":0.02,"unit":"mm/r"},"hex":{"max":0.08,"min":0.01,"nom":0.02,"unit":"mm/r"},"vc":{"max":38.0,"min":38.0,"nom":38.0,"unit":"m/min"}}}


id: cutting-profile-7ad945ffded3a102
tool_id: DCGT-11-T3-02-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 02-UM H13A
source_grade: H13A
source_geometry: DCGT 11 T3 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: N1.3.C.AG
iso_material_group: N
material_subgroup: N1.3.C.AG / 90 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730412/response/product/CuttingOperations/0/materials/2
source_table_ref: product.CuttingOperations[0].materials[2]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":90.0,"hardnessUnit":"HB","lifeTime":1800.0,"material":"N","materialReference":"N1.3.C.AG","sortOrder":3,"startValues":{"ap":{"max":1.5,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.08,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.08,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":2400.0,"min":240.0,"nom":1900.0,"unit":"m/min"}}}


id: cutting-profile-9734b78cb046949a
tool_id: DCGT-11-T3-04-UM-1005
grade_id: grade-c769ff6a7860ece9
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM 1005
source_grade: 1005
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730405/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":420.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.18,"min":0.08,"nom":0.11,"unit":"mm/r"},"hex":{"max":0.18,"min":0.08,"nom":0.1,"unit":"mm/r"},"vc":{"max":80.0,"min":75.0,"nom":80.0,"unit":"m/min"}}}


id: cutting-profile-e365122cd7088943
tool_id: DCGT-11-T3-04-UM-1025
grade_id: grade-a3203f1bfe0d146c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM 1025
source_grade: 1025
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730407/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":420.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.18,"min":0.08,"nom":0.11,"unit":"mm/r"},"hex":{"max":0.18,"min":0.08,"nom":0.1,"unit":"mm/r"},"vc":{"max":33.0,"min":27.0,"nom":31.0,"unit":"m/min"}}}


id: cutting-profile-87b3579a3a575c84
tool_id: DCGT-11-T3-04-UM-1105
grade_id: grade-209be738bc07fc2a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM 1105
source_grade: 1105
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730408/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.18,"min":0.08,"nom":0.11,"unit":"mm/r"},"hex":{"max":0.18,"min":0.08,"nom":0.1,"unit":"mm/r"},"vc":{"max":75.0,"min":40.0,"nom":65.0,"unit":"m/min"}}}


id: cutting-profile-8f7c8e5185e2537b
tool_id: DCGT-11-T3-04-UM-1115
grade_id: grade-175c41879e982175
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM 1115
source_grade: 1115
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730410/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":3.0,"min":0.3,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":230.0,"min":155.0,"nom":190.0,"unit":"m/min"}}}


id: cutting-profile-35d3726997b749f9
tool_id: DCGT-11-T3-04-UM-1115
grade_id: grade-175c41879e982175
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM 1115
source_grade: 1115
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730410/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.18,"min":0.08,"nom":0.11,"unit":"mm/r"},"hex":{"max":0.18,"min":0.08,"nom":0.1,"unit":"mm/r"},"vc":{"max":55.0,"min":32.0,"nom":50.0,"unit":"m/min"}}}


id: cutting-profile-c5b6210929e07a4d
tool_id: DCGT-11-T3-04-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM 1125
source_grade: 1125
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730589/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":3.0,"min":0.3,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":205.0,"min":145.0,"nom":185.0,"unit":"m/min"}}}


id: cutting-profile-e5dc26c2badd0c33
tool_id: DCGT-11-T3-04-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM 1125
source_grade: 1125
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730589/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.18,"min":0.08,"nom":0.11,"unit":"mm/r"},"hex":{"max":0.18,"min":0.08,"nom":0.1,"unit":"mm/r"},"vc":{"max":34.0,"min":33.0,"nom":34.0,"unit":"m/min"}}}


id: cutting-profile-d48b8f4caf89fd78
tool_id: DCGT-11-T3-04-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM 1125
source_grade: 1125
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: N1.3.C.AG
iso_material_group: N
material_subgroup: N1.3.C.AG / 90 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730589/response/product/CuttingOperations/0/materials/2
source_table_ref: product.CuttingOperations[0].materials[2]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":90.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"N","materialReference":"N1.3.C.AG","sortOrder":3,"startValues":{"ap":{"max":3.0,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":640.0,"min":65.0,"nom":510.0,"unit":"m/min"}}}


id: cutting-profile-dfbc3a3bc5b8bebc
tool_id: DCGT-11-T3-04-UM-1205
grade_id: grade-f084825afeb7e89d
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM 1205
source_grade: 1205
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/8432108/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.18,"min":0.08,"nom":0.11,"unit":"mm/r"},"hex":{"max":0.18,"min":0.08,"nom":0.1,"unit":"mm/r"},"vc":{"max":105.0,"min":60.0,"nom":90.0,"unit":"m/min"}}}


id: cutting-profile-c917fdbfe33a0ccb
tool_id: DCGT-11-T3-04-UM-1515
grade_id: grade-e67da29526bc8118
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM 1515
source_grade: 1515
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: P2.1.Z.AN
iso_material_group: P
material_subgroup: P2.1.Z.AN / 175 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730609/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":175.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"P","materialReference":"P2.1.Z.AN","sortOrder":1,"startValues":{"ap":{"max":3.0,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":310.0,"min":165.0,"nom":260.0,"unit":"m/min"}}}


id: cutting-profile-c799b7ae9dace9e4
tool_id: DCGT-11-T3-04-UM-1515
grade_id: grade-e67da29526bc8118
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM 1515
source_grade: 1515
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730609/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":2,"startValues":{"ap":{"max":3.0,"min":0.3,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":245.0,"min":170.0,"nom":225.0,"unit":"m/min"}}}


id: cutting-profile-d96765ef8a7275dd
tool_id: DCGT-11-T3-04-UM-2035
grade_id: grade-3ec2a364456ff15b
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM 2035
source_grade: 2035
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730612/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":3.0,"min":0.3,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":220.0,"min":160.0,"nom":190.0,"unit":"m/min"}}}


id: cutting-profile-8ed025c4b73fbfb3
tool_id: DCGT-11-T3-04-UM-5015
grade_id: grade-3ec908b360fb0d8c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM 5015
source_grade: 5015
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: P2.1.Z.AN
iso_material_group: P
material_subgroup: P2.1.Z.AN / 175 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730614/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":175.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"P","materialReference":"P2.1.Z.AN","sortOrder":1,"startValues":{"ap":{"max":3.0,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":380.0,"min":360.0,"nom":370.0,"unit":"m/min"}}}


id: cutting-profile-c139169281d189d3
tool_id: DCGT-11-T3-04-UM-5015
grade_id: grade-3ec908b360fb0d8c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM 5015
source_grade: 5015
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: K2.2.C.UT
iso_material_group: K
material_subgroup: K2.2.C.UT / 245 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730614/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":245.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"K","materialReference":"K2.2.C.UT","sortOrder":2,"startValues":{"ap":{"max":3.0,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":270.0,"min":205.0,"nom":235.0,"unit":"m/min"}}}


id: cutting-profile-f699c7905559ea35
tool_id: DCGT-11-T3-04-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM H13A
source_grade: H13A
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730403/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":420.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.18,"min":0.08,"nom":0.11,"unit":"mm/r"},"hex":{"max":0.18,"min":0.08,"nom":0.1,"unit":"mm/r"},"vc":{"max":40.0,"min":38.0,"nom":40.0,"unit":"m/min"}}}


id: cutting-profile-3b0a1fd0988fefc8
tool_id: DCGT-11-T3-04-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM H13A
source_grade: H13A
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: K2.2.C.UT
iso_material_group: K
material_subgroup: K2.2.C.UT / 245 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730403/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":245.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"K","materialReference":"K2.2.C.UT","sortOrder":2,"startValues":{"ap":{"max":3.0,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":130.0,"min":110.0,"nom":125.0,"unit":"m/min"}}}


id: cutting-profile-a730b5f043d2cb65
tool_id: DCGT-11-T3-04-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM H13A
source_grade: H13A
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: N1.3.C.AG
iso_material_group: N
material_subgroup: N1.3.C.AG / 90 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730403/response/product/CuttingOperations/0/materials/2
source_table_ref: product.CuttingOperations[0].materials[2]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":90.0,"hardnessUnit":"HB","lifeTime":1800.0,"material":"N","materialReference":"N1.3.C.AG","sortOrder":3,"startValues":{"ap":{"max":3.0,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"hex":{"max":0.25,"min":0.08,"nom":0.15,"unit":"mm/r"},"vc":{"max":2400.0,"min":240.0,"nom":1900.0,"unit":"m/min"}}}


id: cutting-profile-2ce539dbfae846df
tool_id: DCGT-11-T3-04-UM-S05F
grade_id: grade-7baacf0e39e9d205
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM S05F
source_grade: S05F
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730404/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.18,"min":0.08,"nom":0.11,"unit":"mm/r"},"hex":{"max":0.18,"min":0.08,"nom":0.1,"unit":"mm/r"},"vc":{"max":90.0,"min":80.0,"nom":90.0,"unit":"m/min"}}}


id: cutting-profile-028e20c44c4d55e6
tool_id: DCGT-11-T3-04-UM-S205
grade_id: grade-53fc2f6a176197f3
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 04-UM S205
source_grade: S205
source_geometry: DCGT 11 T3 04, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/8003544/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.18,"min":0.08,"nom":0.11,"unit":"mm/r"},"hex":{"max":0.18,"min":0.08,"nom":0.1,"unit":"mm/r"},"vc":{"max":105.0,"min":90.0,"nom":100.0,"unit":"m/min"}}}


id: cutting-profile-d921bd2299fdfabf
tool_id: DCGT-11-T3-08-UM-1005
grade_id: grade-c769ff6a7860ece9
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM 1005
source_grade: 1005
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730594/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":420.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.12,"nom":0.14,"unit":"mm/r"},"hex":{"max":0.24,"min":0.12,"nom":0.14,"unit":"mm/r"},"vc":{"max":80.0,"min":60.0,"nom":80.0,"unit":"m/min"}}}


id: cutting-profile-b6860e18d18b2577
tool_id: DCGT-11-T3-08-UM-1025
grade_id: grade-a3203f1bfe0d146c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM 1025
source_grade: 1025
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730596/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":420.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.12,"nom":0.14,"unit":"mm/r"},"hex":{"max":0.24,"min":0.12,"nom":0.14,"unit":"mm/r"},"vc":{"max":30.0,"min":24.0,"nom":29.0,"unit":"m/min"}}}


id: cutting-profile-b1c1944c86004b1d
tool_id: DCGT-11-T3-08-UM-1105
grade_id: grade-209be738bc07fc2a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM 1105
source_grade: 1105
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730599/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.12,"nom":0.14,"unit":"mm/r"},"hex":{"max":0.24,"min":0.12,"nom":0.14,"unit":"mm/r"},"vc":{"max":60.0,"min":28.0,"nom":50.0,"unit":"m/min"}}}


id: cutting-profile-40e2a435b35966f0
tool_id: DCGT-11-T3-08-UM-1115
grade_id: grade-175c41879e982175
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM 1115
source_grade: 1115
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730600/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":3.0,"min":0.3,"nom":1.25,"unit":"mm"},"fn":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":205.0,"min":130.0,"nom":170.0,"unit":"m/min"}}}


id: cutting-profile-97f74f4d5309b6bf
tool_id: DCGT-11-T3-08-UM-1115
grade_id: grade-175c41879e982175
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM 1115
source_grade: 1115
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730600/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.12,"nom":0.14,"unit":"mm/r"},"hex":{"max":0.24,"min":0.12,"nom":0.14,"unit":"mm/r"},"vc":{"max":45.0,"min":21.0,"nom":40.0,"unit":"m/min"}}}


id: cutting-profile-3b5710503b55a88f
tool_id: DCGT-11-T3-08-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM 1125
source_grade: 1125
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730602/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":3.0,"min":0.3,"nom":1.25,"unit":"mm"},"fn":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":200.0,"min":110.0,"nom":165.0,"unit":"m/min"}}}


id: cutting-profile-ffe47fcc45849902
tool_id: DCGT-11-T3-08-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM 1125
source_grade: 1125
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730602/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.12,"nom":0.14,"unit":"mm/r"},"hex":{"max":0.24,"min":0.12,"nom":0.14,"unit":"mm/r"},"vc":{"max":35.0,"min":29.0,"nom":35.0,"unit":"m/min"}}}


id: cutting-profile-b98692a7665ae0a3
tool_id: DCGT-11-T3-08-UM-1125
grade_id: grade-0a7391b735cb76f0
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM 1125
source_grade: 1125
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: N1.3.C.AG
iso_material_group: N
material_subgroup: N1.3.C.AG / 90 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730602/response/product/CuttingOperations/0/materials/2
source_table_ref: product.CuttingOperations[0].materials[2]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":90.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"N","materialReference":"N1.3.C.AG","sortOrder":3,"startValues":{"ap":{"max":3.0,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":590.0,"min":60.0,"nom":475.0,"unit":"m/min"}}}


id: cutting-profile-1264bcf0c1350d4a
tool_id: DCGT-11-T3-08-UM-1205
grade_id: grade-f084825afeb7e89d
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM 1205
source_grade: 1205
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/8432109/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.12,"nom":0.14,"unit":"mm/r"},"hex":{"max":0.24,"min":0.12,"nom":0.14,"unit":"mm/r"},"vc":{"max":80.0,"min":39.0,"nom":75.0,"unit":"m/min"}}}


id: cutting-profile-b72cafd0c1243e84
tool_id: DCGT-11-T3-08-UM-1515
grade_id: grade-e67da29526bc8118
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM 1515
source_grade: 1515
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: P2.1.Z.AN
iso_material_group: P
material_subgroup: P2.1.Z.AN / 175 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730605/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":175.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"P","materialReference":"P2.1.Z.AN","sortOrder":1,"startValues":{"ap":{"max":3.0,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":290.0,"min":105.0,"nom":205.0,"unit":"m/min"}}}


id: cutting-profile-c423f81474bedde9
tool_id: DCGT-11-T3-08-UM-1515
grade_id: grade-e67da29526bc8118
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM 1515
source_grade: 1515
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730605/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":2,"startValues":{"ap":{"max":3.0,"min":0.3,"nom":1.25,"unit":"mm"},"fn":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":235.0,"min":130.0,"nom":195.0,"unit":"m/min"}}}


id: cutting-profile-6d29bdc131245891
tool_id: DCGT-11-T3-08-UM-5015
grade_id: grade-3ec908b360fb0d8c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM 5015
source_grade: 5015
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: P2.1.Z.AN
iso_material_group: P
material_subgroup: P2.1.Z.AN / 175 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730610/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":175.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"P","materialReference":"P2.1.Z.AN","sortOrder":1,"startValues":{"ap":{"max":3.0,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.25,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":370.0,"min":360.0,"nom":360.0,"unit":"m/min"}}}


id: cutting-profile-b5f5f1976e17fdfa
tool_id: DCGT-11-T3-08-UM-5015
grade_id: grade-3ec908b360fb0d8c
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM 5015
source_grade: 5015
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: K2.2.C.UT
iso_material_group: K
material_subgroup: K2.2.C.UT / 245 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730610/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":245.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"K","materialReference":"K2.2.C.UT","sortOrder":2,"startValues":{"ap":{"max":3.0,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.25,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":250.0,"min":205.0,"nom":215.0,"unit":"m/min"}}}


id: cutting-profile-c11346219a23f19e
tool_id: DCGT-11-T3-08-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM H13A
source_grade: H13A
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730617/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":420.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.12,"nom":0.14,"unit":"mm/r"},"hex":{"max":0.24,"min":0.12,"nom":0.14,"unit":"mm/r"},"vc":{"max":40.0,"min":33.0,"nom":40.0,"unit":"m/min"}}}


id: cutting-profile-ee91eae4215cd7c1
tool_id: DCGT-11-T3-08-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM H13A
source_grade: H13A
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: K2.2.C.UT
iso_material_group: K
material_subgroup: K2.2.C.UT / 245 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730617/response/product/CuttingOperations/0/materials/1
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":245.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"K","materialReference":"K2.2.C.UT","sortOrder":2,"startValues":{"ap":{"max":3.0,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":130.0,"min":100.0,"nom":120.0,"unit":"m/min"}}}


id: cutting-profile-d7be3d5469db1d31
tool_id: DCGT-11-T3-08-UM-H13A
grade_id: grade-2fb62c80c026f90a
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM H13A
source_grade: H13A
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: N1.3.C.AG
iso_material_group: N
material_subgroup: N1.3.C.AG / 90 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730617/response/product/CuttingOperations/0/materials/2
source_table_ref: product.CuttingOperations[0].materials[2]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":90.0,"hardnessUnit":"HB","lifeTime":1800.0,"material":"N","materialReference":"N1.3.C.AG","sortOrder":3,"startValues":{"ap":{"max":3.0,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"hex":{"max":0.35,"min":0.12,"nom":0.2,"unit":"mm/r"},"vc":{"max":2400.0,"min":240.0,"nom":1900.0,"unit":"m/min"}}}


id: cutting-profile-1b716ffc4e00af8f
tool_id: DCGT-11-T3-08-UM-S05F
grade_id: grade-7baacf0e39e9d205
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM S05F
source_grade: S05F
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/5730592/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.12,"nom":0.14,"unit":"mm/r"},"hex":{"max":0.24,"min":0.12,"nom":0.14,"unit":"mm/r"},"vc":{"max":85.0,"min":70.0,"nom":85.0,"unit":"m/min"}}}


id: cutting-profile-7a64681b20884a64
tool_id: DCGT-11-T3-08-UM-S205
grade_id: grade-53fc2f6a176197f3
source_id: source-7623be9cbcee8c6d
source_part_number: DCGT 11 T3 08-UM S205
source_grade: S205
source_geometry: DCGT 11 T3 08, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /products/8003545/response/product/CuttingOperations/0/materials/0
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":1,"startValues":{"ap":{"max":2.1,"min":0.5,"nom":1.25,"unit":"mm"},"fn":{"max":0.25,"min":0.12,"nom":0.14,"unit":"mm/r"},"hex":{"max":0.24,"min":0.12,"nom":0.14,"unit":"mm/r"},"vc":{"max":100.0,"min":80.0,"nom":95.0,"unit":"m/min"}}}


id: cutting-profile-9e24a7cbcfc3cda8
tool_id: DCGT-11-T3-02-UM
grade_id: grade-209be738bc07fc2a
source_id: source-718d750d3903ffc2
source_part_number: DCGT 11 T3 02-UM 1105
source_grade: 1105
source_geometry: DCGT 11 T3 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /product/cutting_operations/0/materials/0
source_table_ref: CuttingOperations[0] / materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"material":"S","materialReference":"S2.0.Z.AG","hardness":350.0,"hardnessUnit":"HB","startValues":{"ap":{"min":0.1,"nom":0.5,"max":1.05,"unit":"mm"},"fn":{"min":0.01,"nom":0.02,"max":0.08,"unit":"mm/r"},"vc":{"min":70.0,"nom":70.0,"max":70.0,"unit":"m/min"}}}

notes:
Greg asked on 2026-07-23 to fix this exact Sandvik product. The correction uses the identity-gated structured product snapshot for material 5730414 and keeps availability separate from lifecycle.


id: cutting-profile-35772c258f894fa8
tool_id: DCGT-11-T3-02-UM-1115
grade_id: grade-175c41879e982175
source_id: source-ea2b2d84fdbf16f8
source_part_number: DCGT 11 T3 02-UM 1115
source_grade: 1115
source_geometry: DCGT 11 T3 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: M1.0.Z.AQ
iso_material_group: M
material_subgroup: M1.0.Z.AQ / 200 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /product
source_table_ref: product.CuttingOperations[0].materials[0]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"AN":7.0,"CBMD":"UM","CuttingOperations":[{"materials":[{"hardness":200.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"M","materialReference":"M1.0.Z.AQ","sortOrder":1,"startValues":{"ap":{"max":1.5,"min":0.1,"nom":0.3,"unit":"mm"},"fn":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"hex":{"max":0.06,"min":0.01,"nom":0.03,"unit":"mm/r"},"vc":{"max":260.0,"min":240.0,"nom":260.0,"unit":"m/min"}}}]}],"GRADE":"1115","InsertDesignation":"DCGT","InsertSizeCode":"11T302","MaterialID":5730415,"ORDCODE":"DCGT 11 T3 02-UM    1115","PRODFAM":"CoroTurn 107","SC":"Rhombic 55"}

notes:
Greg directed the 1115 trial insert through release and then explicitly corrected the model: 1105 and 1115 are completely different inserts even though their preceding designation segments are shared. He supplied the ISO 1832 and Sandvik suffix framework and asked that manufacturer designation conventions become the primary ingestion starting point. Exact Sandvik product payload values override generic examples where they differ.


id: cutting-profile-1037ab68daee8a66
tool_id: DCGT-11-T3-02-UM-1115
grade_id: grade-175c41879e982175
source_id: source-ea2b2d84fdbf16f8
source_part_number: DCGT 11 T3 02-UM 1115
source_grade: 1115
source_geometry: DCGT 11 T3 02, 55-degree rhombic, 7-degree positive
source_chipbreaker: UM
source_material_label: S2.0.Z.AG
iso_material_group: S
material_subgroup: S2.0.Z.AG / 350 HB
operation_type: turning
cut_condition: unknown
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: /product
source_table_ref: product.CuttingOperations[0].materials[1]
extraction_method: manufacturer_page
verification_status: manufacturer_verified
reviewer: Greg
reviewed_at: 2026-07-23
source_raw_text:
{"AN":7.0,"CBMD":"UM","CuttingOperations":[{"materials":[{"hardness":350.0,"hardnessUnit":"HB","lifeTime":900.0,"material":"S","materialReference":"S2.0.Z.AG","sortOrder":2,"startValues":{"ap":{"max":1.05,"min":0.1,"nom":0.5,"unit":"mm"},"fn":{"max":0.08,"min":0.01,"nom":0.02,"unit":"mm/r"},"hex":{"max":0.08,"min":0.01,"nom":0.02,"unit":"mm/r"},"vc":{"max":55.0,"min":55.0,"nom":55.0,"unit":"m/min"}}}]}],"GRADE":"1115","InsertDesignation":"DCGT","InsertSizeCode":"11T302","MaterialID":5730415,"ORDCODE":"DCGT 11 T3 02-UM    1115","PRODFAM":"CoroTurn 107","SC":"Rhombic 55"}

notes:
Greg directed the 1115 trial insert through release and then explicitly corrected the model: 1105 and 1115 are completely different inserts even though their preceding designation segments are shared. He supplied the ISO 1832 and Sandvik suffix framework and asked that manufacturer designation conventions become the primary ingestion starting point. Exact Sandvik product payload values override generic examples where they differ.


id: cutting-profile-eb5e206179e22cbe
tool_id: DCGT11T302FN-JS
grade_id: grade-af4f2e856ab8ec20
source_id: source-ae22b2758f8739f0
source_part_number: DCGT11T302FN-JS
source_grade: SH7025
source_geometry: DCGT 11T3 02 positive, 7-deg clearance, JS chipbreaker
source_chipbreaker: JS
source_material_label: Carbon steel, Alloy steel
iso_material_group: P
material_subgroup: Carbon / alloy steel
operation_type: turning
cut_condition: finishing
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: #post-393473
extraction_method: manufacturer_page
verification_status: manufacturer_verified
notes: Coolant remains unknown; the standard-condition table does not state it.
source_table_ref:
Tungaloy SH7025 standard cutting conditions, ISO P (Carbon steel, Alloy steel); cutting speed Vc m/min; depth of cut by chipbreaker; feed by strict corner-radius upper bound and chipbreaker row; coolant is not stated in this standard-condition table.

source_raw_text:
<table>
<thead>
<tr>
<th rowspan="2">ISO</th>
<th rowspan="2">Workpiece material</th>
<th rowspan="2">Chipbreaker</th>
<th rowspan="2">Grade</th>
<th rowspan="2">Cutting speed<br />
<em>V</em>c (m/min)</th>
<th rowspan="2">Depth of cut<br />
<em>a</em>p (mm)</th>
<th colspan="4">Feed: <em>f</em> (mm/rev)</th>
</tr>
<tr>
<th>RE &lt; 0.03</th>
<th>RE &lt; 0.1</th>
<th>RE &lt; 0.2</th>
<th>RE &lt; 0.4</th>
</tr>
</thead>
<tbody>
<tr>
<td class="p50" rowspan="2"><img decoding="async" src="https://tungaloy.com/wpdata/wp-content/uploads/ISO_P.png" alt="" /></td>
<td class="p40" rowspan="2">Carbon steel<br />
Alloy steel</td>
<td class="p20">JP</td>
<td class="p20">SH7025</td>
<td class="p20">10 &#8211; 200</td>
<td class="p20">0.05 &#8211; 2.5</td>
<td class="p20">0.02 &#8211; 0.03</td>
<td class="p20">0.02 &#8211; 0.05</td>
<td class="p20">0.02 &#8211; 0.1</td>
<td class="p20">&#8211;</td>
</tr>
<tr>
<td class="p10">JS</td>
<td class="p10">SH7025</td>
<td class="p10">10 &#8211; 200</td>
<td class="p10">0.5 &#8211; 3</td>
<td class="p10">0.02 &#8211; 0.03</td>
<td class="p10">0.02 &#8211; 0.05</td>
<td class="p10">0.02 &#8211; 0.1</td>
<td class="p10">0.05 &#8211; 0.2</td>
</tr>
<tr>
<td class="m50" rowspan="2"><img decoding="async" src="https://tungaloy.com/wpdata/wp-content/uploads/ISO_M.png" alt="" /></td>
<td class="m40" rowspan="2">Stainless steel</td>
<td class="m20">JP</td>
<td class="m20">SH7025</td>
<td class="m20">10 &#8211; 200</td>
<td class="m20">0.05 &#8211; 2.5</td>
<td class="m20">0.02 &#8211; 0.03</td>
<td class="m20">0.02 &#8211; 0.05</td>
<td class="m20">0.02 &#8211; 0.1</td>
<td class="m20">&#8211;</td>
</tr>
<tr>
<td class="m10">JS</td>
<td class="m10">SH7025</td>
<td class="m10">10 &#8211; 200</td>
<td class="m10">0.5 &#8211; 3</td>
<td class="m10">0.02 &#8211; 0.03</td>
<td class="m10">0.02 &#8211; 0.05</td>
<td class="m10">0.02 &#8211; 0.1</td>
<td class="m10">0.05 &#8211; 0.2</td>
</tr>
</tbody>
</table>


id: cutting-profile-cb5c56b07ae01b08
tool_id: DCGT11T302FN-JS
grade_id: grade-af4f2e856ab8ec20
source_id: source-ae22b2758f8739f0
source_part_number: DCGT11T302FN-JS
source_grade: SH7025
source_geometry: DCGT 11T3 02 positive, 7-deg clearance, JS chipbreaker
source_chipbreaker: JS
source_material_label: Stainless steel
iso_material_group: M
material_subgroup: Stainless steel
operation_type: turning
cut_condition: finishing
coolant_condition: unknown
surface_speed_unit: m_per_min
feed_unit: mm_per_rev
depth_of_cut_unit: mm
source_page_ref: #post-393473
extraction_method: manufacturer_page
verification_status: manufacturer_verified
notes: Coolant remains unknown; the standard-condition table does not state it.
source_table_ref:
Tungaloy SH7025 standard cutting conditions, ISO M (Stainless steel); cutting speed Vc m/min; depth of cut by chipbreaker; feed by strict corner-radius upper bound and chipbreaker row; coolant is not stated in this standard-condition table.

source_raw_text:
<table>
<thead>
<tr>
<th rowspan="2">ISO</th>
<th rowspan="2">Workpiece material</th>
<th rowspan="2">Chipbreaker</th>
<th rowspan="2">Grade</th>
<th rowspan="2">Cutting speed<br />
<em>V</em>c (m/min)</th>
<th rowspan="2">Depth of cut<br />
<em>a</em>p (mm)</th>
<th colspan="4">Feed: <em>f</em> (mm/rev)</th>
</tr>
<tr>
<th>RE &lt; 0.03</th>
<th>RE &lt; 0.1</th>
<th>RE &lt; 0.2</th>
<th>RE &lt; 0.4</th>
</tr>
</thead>
<tbody>
<tr>
<td class="p50" rowspan="2"><img decoding="async" src="https://tungaloy.com/wpdata/wp-content/uploads/ISO_P.png" alt="" /></td>
<td class="p40" rowspan="2">Carbon steel<br />
Alloy steel</td>
<td class="p20">JP</td>
<td class="p20">SH7025</td>
<td class="p20">10 &#8211; 200</td>
<td class="p20">0.05 &#8211; 2.5</td>
<td class="p20">0.02 &#8211; 0.03</td>
<td class="p20">0.02 &#8211; 0.05</td>
<td class="p20">0.02 &#8211; 0.1</td>
<td class="p20">&#8211;</td>
</tr>
<tr>
<td class="p10">JS</td>
<td class="p10">SH7025</td>
<td class="p10">10 &#8211; 200</td>
<td class="p10">0.5 &#8211; 3</td>
<td class="p10">0.02 &#8211; 0.03</td>
<td class="p10">0.02 &#8211; 0.05</td>
<td class="p10">0.02 &#8211; 0.1</td>
<td class="p10">0.05 &#8211; 0.2</td>
</tr>
<tr>
<td class="m50" rowspan="2"><img decoding="async" src="https://tungaloy.com/wpdata/wp-content/uploads/ISO_M.png" alt="" /></td>
<td class="m40" rowspan="2">Stainless steel</td>
<td class="m20">JP</td>
<td class="m20">SH7025</td>
<td class="m20">10 &#8211; 200</td>
<td class="m20">0.05 &#8211; 2.5</td>
<td class="m20">0.02 &#8211; 0.03</td>
<td class="m20">0.02 &#8211; 0.05</td>
<td class="m20">0.02 &#8211; 0.1</td>
<td class="m20">&#8211;</td>
</tr>
<tr>
<td class="m10">JS</td>
<td class="m10">SH7025</td>
<td class="m10">10 &#8211; 200</td>
<td class="m10">0.5 &#8211; 3</td>
<td class="m10">0.02 &#8211; 0.03</td>
<td class="m10">0.02 &#8211; 0.05</td>
<td class="m10">0.02 &#8211; 0.1</td>
<td class="m10">0.05 &#8211; 0.2</td>
</tr>
</tbody>
</table>


# cutting_data_profile_sources

profile_id: cutting-profile-eb5e206179e22cbe
source_id: source-2207a1acbd668efa
evidence_role: verification
source_page_ref: /standard_cutting_conditions/P
source_table_ref: Hash-verified normalized standard cutting conditions
extraction_method: normalized_from_manufacturer_page
source_raw_text:
{"depth_of_cut_mm_by_chipbreaker":{"JP":{"max":2.5,"min":0.05},"JS":{"max":3,"min":0.5}},"feed_mm_rev_by_chipbreaker_and_strict_radius_band":{"JP":[{"max":0.03,"max_corner_radius_exclusive_mm":0.03,"min":0.02},{"max":0.05,"max_corner_radius_exclusive_mm":0.1,"min":0.02},{"max":0.1,"max_corner_radius_exclusive_mm":0.2,"min":0.02},{"max":null,"max_corner_radius_exclusive_mm":0.4,"min":null}],"JS":[{"max":0.03,"max_corner_radius_exclusive_mm":0.03,"min":0.02},{"max":0.05,"max_corner_radius_exclusive_mm":0.1,"min":0.02},{"max":0.1,"max_corner_radius_exclusive_mm":0.2,"min":0.02},{"max":0.2,"max_corner_radius_exclusive_mm":0.4,"min":0.05}]},"iso_group":"P","materials":"Carbon steel, Alloy steel","vc_m_min":{"max":200,"min":10}}


profile_id: cutting-profile-cb5c56b07ae01b08
source_id: source-2207a1acbd668efa
evidence_role: verification
source_page_ref: /standard_cutting_conditions/M
source_table_ref: Hash-verified normalized standard cutting conditions
extraction_method: normalized_from_manufacturer_page
source_raw_text:
{"depth_of_cut_mm_by_chipbreaker":{"JP":{"max":2.5,"min":0.05},"JS":{"max":3,"min":0.5}},"feed_mm_rev_by_chipbreaker_and_strict_radius_band":{"JP":[{"max":0.03,"max_corner_radius_exclusive_mm":0.03,"min":0.02},{"max":0.05,"max_corner_radius_exclusive_mm":0.1,"min":0.02},{"max":0.1,"max_corner_radius_exclusive_mm":0.2,"min":0.02},{"max":null,"max_corner_radius_exclusive_mm":0.4,"min":null}],"JS":[{"max":0.03,"max_corner_radius_exclusive_mm":0.03,"min":0.02},{"max":0.05,"max_corner_radius_exclusive_mm":0.1,"min":0.02},{"max":0.1,"max_corner_radius_exclusive_mm":0.2,"min":0.02},{"max":0.2,"max_corner_radius_exclusive_mm":0.4,"min":0.05}]},"iso_group":"M","materials":"Stainless steel","vc_m_min":{"max":200,"min":10}}


# compatibility_claims

id: claim-f8a5ac7fdfef7d89
subject_tool_id: ECAS20_GANG_BLOCK_STATION_01
relationship: accepts_holder
object_kind: tool
object_tool_id: DGTR 16B-2D25SH
evidence_status: shop_verified
review_status: accepted
source_id: source-1facdf6acf85a4db
evidence_kind: direct_shop_confirmation_plus_source_dimensions
notes: Station 1 accepts DGTR 16B-2D25SH by an exact 16 mm square machine-side shank match.
generated_by: shop_input_exact_interface_match
source_raw_text:
Any of the 16 mm square shank holders in the database should fit in those 16 mm pockets, and any of the 22 mm round shank holders should fit in the round shank stations.


id: claim-82302dd996cdb9e4
subject_tool_id: B105.0022.02
relationship: mounts_to
object_kind: tool
object_tool_id: ECAS20_GANG_BLOCK
evidence_status: imported
review_status: needs_review
evidence_kind: existing_database
generated_by: scripts/build-compatibility-edges.js
notes:
Imported from tools.mounts_to. Review against manufacturer catalog, machine manual, or shop-proven setup before marking verified.


id: claim-fd02b1a1c5ce8a65
subject_tool_id: CCGT-060202
relationship: compatible_with_machine
object_kind: machine_model
object_value: STAR_ECAS20
evidence_status: imported
review_status: needs_review
evidence_kind: existing_database
generated_by: scripts/build-compatibility-edges.js
notes:
Imported from tools.compatible_machines after cleanup removed prose-only compatibility. Review before marking verified. Suppressed: machine fit must be proven through a physical tool-to-station path.


id: claim-002d160ed5f6fc9a
subject_tool_id: QSM12-SCLCL-09C
relationship: accepts_insert
object_kind: tool
object_tool_id: CCMT09T304-PF
evidence_status: inferred
review_status: needs_review
evidence_kind: iso_seat_match
generated_by: scripts/build-compatibility-edges.js
notes:
Generated by matching holder/module insert_seat to insert iso_designation. Treat as unverified until checked against catalog or shop setup.


